This is the latest recevied telemetry packets stored in our database for station/object N3RPH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774464168 | 1369 | 45 | 0 | 0 | 0 |
| 1774462968 | 1359 | 44 | 0 | 0 | 0 |
| 1774461768 | 1357 | 46 | 0 | 0 | 0 |
| 1774460568 | 1355 | 49 | 0 | 0 | 0 |
| 1774459369 | 1353 | 51 | 0 | 0 | 0 |
| 1774458170 | 1352 | 51 | 0 | 0 | 0 |
| 1774456967 | 1352 | 53 | 0 | 0 | 0 |
| 1774455768 | 1350 | 53 | 0 | 0 | 0 |
| 1774454568 | 1344 | 52 | 0 | 0 | 0 |
| 1774453367 | 1341 | 46 | 0 | 0 | 0 |
| 1774452168 | 1339 | 41 | 0 | 0 | 0 |
| 1774450968 | 1338 | 37 | 0 | 0 | 0 |
| 1774449767 | 1338 | 39 | 0 | 0 | 0 |
| 1774448568 | 1338 | 43 | 0 | 0 | 0 |
| 1774447367 | 1336 | 49 | 0 | 0 | 0 |
| 1774446168 | 1329 | 53 | 0 | 0 | 0 |
| 1774444967 | 1313 | 50 | 0 | 0 | 0 |
| 1774443767 | 1281 | 50 | 0 | 0 | 0 |
| 1774442567 | 1282 | 45 | 0 | 0 | 0 |
| 1774441367 | 1283 | 43 | 0 | 0 | 0 |
| 1774440168 | 1286 | 48 | 0 | 0 | 0 |
| 1774438967 | 1287 | 52 | 0 | 0 | 0 |
| 1774437770 | 1288 | 57 | 0 | 0 | 0 |
| 1774436568 | 1290 | 48 | 0 | 0 | 0 |
| 1774435367 | 1290 | 45 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)