This is the latest recevied telemetry packets stored in our database for station/object SV6GIM-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779800282 | 23.9 C | 1029.5 hPa | 0 | 0 | 0 |
| 1779799378 | 24 C | 1029.88 hPa | 0 | 0 | 0 |
| 1779798474 | 24.7 C | 1030.38 hPa | 0 | 0 | 0 |
| 1779797570 | 26 C | 1030 hPa | 0 | 0 | 0 |
| 1779797508 | 25.8 C | 1029.38 hPa | 0 | 0 | 0 |
| 1779797489 | 25.8 C | 1029.75 hPa | 0 | 0 | 0 |
| 1779797454 | 25.8 C | 1029.63 hPa | 0 | 0 | 0 |
| 1779797438 | 25.8 C | 1029.5 hPa | 0 | 0 | 0 |
| 1779797407 | 25.8 C | 1029.25 hPa | 0 | 0 | 0 |
| 1779797284 | 25.7 C | 1030 hPa | 0 | 0 | 0 |
| 1779797256 | 25.4 C | 1029.5 hPa | 0 | 0 | 0 |
| 1779797198 | 25.3 C | 1029.25 hPa | 0 | 0 | 0 |
| 1779797177 | 25.3 C | 1029.5 hPa | 0 | 0 | 0 |
| 1779797161 | 25.3 C | 1029.25 hPa | 0 | 0 | 0 |
| 1779797136 | 25.4 C | 1029.25 hPa | 0 | 0 | 0 |
| 1779797121 | 25.4 C | 1029.25 hPa | 0 | 0 | 0 |
| 1779797088 | 25.7 C | 1029.38 hPa | 0 | 0 | 0 |
| 1779797071 | 25.7 C | 1029.13 hPa | 0 | 0 | 0 |
| 1779797053 | 25.7 C | 1029.25 hPa | 0 | 0 | 0 |
| 1779797037 | 25.7 C | 1029.63 hPa | 0 | 0 | 0 |
| 1779796613 | 25.4 C | 1029.75 hPa | 0 | 0 | 0 |
| 1779795709 | 24.6 C | 1030.25 hPa | 0 | 0 | 0 |
| 1779794805 | 25.1 C | 1030.38 hPa | 0 | 0 | 0 |
| 1779793901 | 25.3 C | 1030.13 hPa | 0 | 0 | 0 |
| 1779793869 | 25.3 C | 1029 hPa | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)