This is the latest recevied telemetry packets stored in our database for station/object SP4FDH-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775571611 | 530 | 51 | 0 | 0 | 0 |
| 1775571007 | 546 | 51 | 0 | 0 | 0 |
| 1775570410 | 542 | 51 | 0 | 0 | 0 |
| 1775569806 | 534 | 50 | 0 | 0 | 0 |
| 1775569206 | 505 | 51 | 0 | 0 | 0 |
| 1775568610 | 454 | 4 | 0 | 0 | 0 |
| 1775568007 | 458 | 2 | 0 | 0 | 0 |
| 1775567411 | 458 | 4 | 0 | 0 | 0 |
| 1775566806 | 458 | 3 | 0 | 0 | 0 |
| 1775566211 | 456 | 4 | 0 | 0 | 0 |
| 1775565606 | 458 | 4 | 0 | 0 | 0 |
| 1775565010 | 458 | 4 | 0 | 0 | 0 |
| 1775564406 | 455 | 7 | 0 | 0 | 0 |
| 1775563811 | 450 | 3 | 0 | 0 | 0 |
| 1775563206 | 449 | 4 | 0 | 0 | 0 |
| 1775562611 | 452 | 2 | 0 | 0 | 0 |
| 1775561406 | 445 | 5 | 0 | 0 | 0 |
| 1775560810 | 438 | 3 | 0 | 0 | 0 |
| 1775560207 | 415 | 4 | 0 | 0 | 0 |
| 1775559611 | 382 | 8 | 0 | 0 | 0 |
| 1775553010 | 460 | 6 | 0 | 0 | 0 |
| 1775552406 | 458 | 8 | 0 | 0 | 0 |
| 1775551810 | 455 | 1 | 0 | 0 | 0 |
| 1775551206 | 455 | 4 | 0 | 0 | 0 |
| 1775550610 | 452 | 1 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)