APRS Track Direct

My position About ☰

reset

F6FKQ-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F6FKQ-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Volt_in*	Rx_1h*	Eff_1h*	Temp*
1754168197	13.87 Volt	10 Pkt	42 Pcnt	20.76 C
1754167897	13.87 Volt	10 Pkt	35 Pcnt	20.76 C
1754167597	13.87 Volt	10 Pkt	33 Pcnt	20.76 C
1754167297	13.87 Volt	10 Pkt	37 Pcnt	20.76 C
1754166997	13.87 Volt	10 Pkt	42 Pcnt	20.76 C
1754166697	13.87 Volt	10 Pkt	38 Pcnt	20.76 C
1754166397	13.87 Volt	10 Pkt	41 Pcnt	20.76 C
1754166097	13.87 Volt	10 Pkt	33 Pcnt	20.76 C
1754165797	13.87 Volt	10 Pkt	32 Pcnt	20.76 C
1754165497	13.87 Volt	10 Pkt	32 Pcnt	20.76 C
1754165197	13.87 Volt	10 Pkt	34 Pcnt	20.76 C
1754164898	13.87 Volt	10 Pkt	40 Pcnt	20.76 C
1754164598	13.87 Volt	10 Pkt	51 Pcnt	20.76 C
1754164302	13.87 Volt	10 Pkt	57 Pcnt	20.76 C
1754163998	13.87 Volt	10 Pkt	55 Pcnt	20.76 C
1754163698	13.87 Volt	10 Pkt	52 Pcnt	20.76 C
1754163398	13.87 Volt	10 Pkt	50 Pcnt	20.76 C
1754163098	13.87 Volt	10 Pkt	51 Pcnt	20.76 C
1754162798	13.87 Volt	10 Pkt	44 Pcnt	20.76 C
1754162498	13.87 Volt	10 Pkt	48 Pcnt	20.76 C
1754162198	13.87 Volt	10 Pkt	52 Pcnt	20.76 C
1754161898	13.87 Volt	10 Pkt	54 Pcnt	20.76 C
1754161598	13.87 Volt	10 Pkt	50 Pcnt	20.76 C
1754161298	13.87 Volt	10 Pkt	48 Pcnt	20.76 C
1754160999	13.87 Volt	0 Pkt	23 Pcnt	20.76 C

*Used Equation Coefficients:

Volt_in: 0, 0.073, 0

Rx_1h: 0, 10, 0

Dg_1h: 0, 10, 0

Eff_1h: 0, 1, 0

Temp: 0, 0.12, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)