This is the latest recevied telemetry packets stored in our database for station/object 2E0TOY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Rx10m* | Eff* | Eff1h* |
|---|---|---|---|---|---|
| 1732469956 | 15.08 V | 30 pkt | 4 pkt | 40 % | 41 % |
| 1732469356 | 15.08 V | 30 pkt | 4 pkt | 40 % | 36 % |
| 1732468756 | 15.08 V | 30 pkt | 3 pkt | 40 % | 36 % |
| 1732468156 | 15.08 V | 30 pkt | 7 pkt | 40 % | 41 % |
| 1732467557 | 15.08 V | 30 pkt | 6 pkt | 40 % | 42 % |
| 1732466956 | 15.08 V | 20 pkt | 5 pkt | 40 % | 43 % |
| 1732466356 | 15.08 V | 30 pkt | 4 pkt | 40 % | 45 % |
| 1732465756 | 15.08 V | 30 pkt | 5 pkt | 40 % | 49 % |
| 1732465156 | 15.08 V | 30 pkt | 3 pkt | 40 % | 42 % |
| 1732464556 | 15.08 V | 40 pkt | 5 pkt | 40 % | 38 % |
| 1732463956 | 15.08 V | 30 pkt | 3 pkt | 40 % | 34 % |
| 1732463356 | 15.08 V | 40 pkt | 7 pkt | 40 % | 35 % |
| 1732462756 | 15.08 V | 30 pkt | 7 pkt | 40 % | 33 % |
| 1732462156 | 15.08 V | 30 pkt | 5 pkt | 40 % | 33 % |
| 1732461556 | 15.08 V | 30 pkt | 7 pkt | 40 % | 35 % |
| 1732460956 | 15.08 V | 20 pkt | 3 pkt | 40 % | 35 % |
| 1732460356 | 15.08 V | 20 pkt | 7 pkt | 40 % | 35 % |
| 1732459757 | 15.08 V | 20 pkt | 5 pkt | 40 % | 31 % |
| 1732459156 | 15.08 V | 20 pkt | 4 pkt | 40 % | 31 % |
| 1732458557 | 15.08 V | 30 pkt | 5 pkt | 40 % | 31 % |
| 1732457957 | 15.08 V | 30 pkt | 3 pkt | 40 % | 36 % |
| 1732457357 | 15.08 V | 30 pkt | 3 pkt | 40 % | 35 % |
| 1732456757 | 15.08 V | 30 pkt | 5 pkt | 40 % | 40 % |
| 1732456157 | 15.08 V | 30 pkt | 8 pkt | 40 % | 46 % |
| 1732455557 | 15.08 V | 30 pkt | 6 pkt | 40 % | 44 % |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Rx10m: 0, 1, 0
Eff: 0, 1, 0
Eff1h: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)