This is the latest recevied telemetry packets stored in our database for station/object EC1KV-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1739740127 | 5 | 4 | 50 | 184 | 0 |
1739738325 | 6 | 5 | 50 | 183 | 0 |
1739737425 | 7 | 6 | 51 | 184 | 0 |
1739736524 | 8 | 7 | 51 | 184 | 0 |
1739733821 | 8 | 6 | 51 | 184 | 0 |
1739732920 | 8 | 6 | 51 | 184 | 0 |
1739731118 | 11 | 8 | 51 | 184 | 0 |
1739729317 | 14 | 11 | 51 | 184 | 0 |
1739727515 | 11 | 9 | 51 | 183 | 0 |
1739726614 | 11 | 8 | 51 | 184 | 0 |
1739723912 | 14 | 11 | 51 | 184 | 0 |
1739723011 | 13 | 11 | 52 | 184 | 0 |
1739722110 | 13 | 10 | 52 | 184 | 0 |
1739720308 | 11 | 9 | 52 | 184 | 0 |
1739718507 | 10 | 8 | 52 | 184 | 0 |
1739717606 | 9 | 8 | 52 | 184 | 0 |
1739716705 | 9 | 7 | 52 | 184 | 0 |
1739715804 | 10 | 8 | 52 | 184 | 0 |
1739714903 | 9 | 7 | 52 | 184 | 0 |
1739714003 | 11 | 9 | 52 | 184 | 0 |
1739713101 | 17 | 14 | 52 | 184 | 0 |
1739712201 | 20 | 16 | 52 | 184 | 0 |
1739711300 | 22 | 17 | 52 | 184 | 0 |
1739710399 | 23 | 17 | 52 | 184 | 0 |
1739709498 | 21 | 16 | 52 | 184 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)