APRS Track Direct

My position About ☰

reset

OE9XKV-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE9XKV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	RTemp*
1750171717	13.58 Volt	990 Pkt	78 Pcnt	29.5 °c
1750171417	13.65 Volt	1000 Pkt	78 Pcnt	29.5 °c
1750171124	13.65 Volt	990 Pkt	78 Pcnt	29.5 °c
1750171117	13.65 Volt	990 Pkt	78 Pcnt	29.5 °c
1750170817	13.65 Volt	980 Pkt	77 Pcnt	29.5 °c
1750170517	13.58 Volt	970 Pkt	77 Pcnt	29.5 °c
1750170218	13.65 Volt	980 Pkt	77 Pcnt	29.5 °c
1750170217	13.65 Volt	980 Pkt	77 Pcnt	29.5 °c
1750169917	13.65 Volt	960 Pkt	77 Pcnt	29.5 °c
1750169617	13.65 Volt	980 Pkt	77 Pcnt	29.5 °c
1750169319	13.65 Volt	960 Pkt	76 Pcnt	29.5 °c
1750169318	13.65 Volt	960 Pkt	76 Pcnt	29.5 °c
1750169018	13.65 Volt	960 Pkt	76 Pcnt	29.5 °c
1750168718	13.65 Volt	950 Pkt	77 Pcnt	29.5 °c
1750168419	13.58 Volt	950 Pkt	76 Pcnt	29.5 °c
1750168417	13.58 Volt	950 Pkt	76 Pcnt	29.5 °c
1750168117	13.65 Volt	920 Pkt	77 Pcnt	29.5 °c
1750167818	13.58 Volt	950 Pkt	77 Pcnt	29.5 °c
1750167520	13.65 Volt	940 Pkt	78 Pcnt	30 °c
1750167518	13.65 Volt	940 Pkt	78 Pcnt	30 °c
1750167217	13.65 Volt	940 Pkt	78 Pcnt	30 °c
1750166918	13.65 Volt	930 Pkt	79 Pcnt	30 °c
1750166618	13.65 Volt	950 Pkt	79 Pcnt	30 °c
1750166617	13.65 Volt	950 Pkt	79 Pcnt	30 °c
1750166318	13.58 Volt	940 Pkt	79 Pcnt	29.5 °c

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

RTemp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)