This is the latest recevied telemetry packets stored in our database for station/object ER-EA4FMF. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774125871 | 49 | 116 | 3 | 5 | 0 |
| 1774125271 | 11 | 72 | 1 | 7 | 0 |
| 1774124671 | 63 | 108 | 4 | 7 | 0 |
| 1774124071 | 21 | 40 | 2 | 6 | 0 |
| 1774123471 | 0 | 63 | 0 | 11 | 0 |
| 1774122871 | 11 | 69 | 1 | 13 | 0 |
| 1774122271 | 196 | 494 | 6 | 5 | 0 |
| 1774121671 | 170 | 487 | 6 | 10 | 0 |
| 1774121071 | 88 | 242 | 4 | 15 | 0 |
| 1774120471 | 16 | 92 | 2 | 7 | 0 |
| 1774119871 | 20 | 267 | 3 | 8 | 0 |
| 1774119271 | 51 | 388 | 6 | 10 | 0 |
| 1774118671 | 114 | 235 | 7 | 7 | 0 |
| 1774118071 | 41 | 186 | 3 | 13 | 0 |
| 1774117471 | 0 | 258 | 0 | 11 | 0 |
| 1774116871 | 38 | 154 | 3 | 7 | 0 |
| 1774116271 | 153 | 172 | 4 | 11 | 0 |
| 1774115671 | 0 | 175 | 0 | 8 | 0 |
| 1774115071 | 0 | 474 | 0 | 15 | 0 |
| 1774114471 | 0 | 128 | 0 | 10 | 0 |
| 1774113871 | 107 | 523 | 2 | 19 | 0 |
| 1774113271 | 105 | 346 | 8 | 16 | 0 |
| 1774112671 | 46 | 184 | 3 | 6 | 0 |
| 1774112071 | 53 | 127 | 4 | 11 | 0 |
| 1774111471 | 27 | 25 | 3 | 4 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)