APRS Track Direct

My position About ☰

reset

SR1GPS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR1GPS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1778033816	12.38 Volt	0 Pkt	0 Pkt	38 Pcnt
1778033516	12.38 Volt	0 Pkt	0 Pkt	39 Pcnt
1778033216	12.38 Volt	10 Pkt	0 Pkt	41 Pcnt
1778032916	12.38 Volt	10 Pkt	10 Pkt	46 Pcnt
1778032616	12.38 Volt	10 Pkt	0 Pkt	42 Pcnt
1778032316	12.38 Volt	10 Pkt	10 Pkt	43 Pcnt
1778032016	12.38 Volt	10 Pkt	10 Pkt	37 Pcnt
1778031716	12.38 Volt	10 Pkt	10 Pkt	40 Pcnt
1778031416	12.38 Volt	10 Pkt	10 Pkt	37 Pcnt
1778031116	12.38 Volt	10 Pkt	10 Pkt	40 Pcnt
1778030816	12.38 Volt	10 Pkt	10 Pkt	40 Pcnt
1778030516	12.38 Volt	10 Pkt	10 Pkt	53 Pcnt
1778030216	12.38 Volt	10 Pkt	10 Pkt	51 Pcnt
1778029916	12.38 Volt	10 Pkt	10 Pkt	57 Pcnt
1778029616	12.38 Volt	10 Pkt	10 Pkt	54 Pcnt
1778029316	12.38 Volt	10 Pkt	10 Pkt	58 Pcnt
1778029016	12.38 Volt	10 Pkt	10 Pkt	57 Pcnt
1778028716	12.38 Volt	10 Pkt	10 Pkt	63 Pcnt
1778028416	12.38 Volt	10 Pkt	10 Pkt	68 Pcnt
1778028116	12.38 Volt	10 Pkt	10 Pkt	66 Pcnt
1778027816	12.38 Volt	10 Pkt	10 Pkt	52 Pcnt
1778027516	12.38 Volt	10 Pkt	10 Pkt	51 Pcnt
1778027216	12.38 Volt	10 Pkt	10 Pkt	50 Pcnt
1778026916	12.38 Volt	10 Pkt	10 Pkt	52 Pcnt
1778026616	12.38 Volt	10 Pkt	0 Pkt	50 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)