This is the latest recevied telemetry packets stored in our database for station/object DF1IAN-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786710391 | 33.1 | 1012.13 | 0 | 0 | 0 |
| 1786705017 | 30 | 1023.75 | 0 | 0 | 0 |
| 1786700221 | 27.8 | 1020.38 | 0 | 0 | 0 |
| 1786696004 | 26.5 | 1019.88 | 0 | 0 | 0 |
| 1786692442 | 25.5 | 1026.63 | 0 | 0 | 0 |
| 1786690008 | 25.1 | 1015.88 | 0 | 0 | 0 |
| 1786686325 | 25 | 1024 | 0 | 0 | 0 |
| 1786681059 | 25.9 | 1022.25 | 0 | 0 | 0 |
| 1786677107 | 26.7 | 1018.5 | 0 | 0 | 0 |
| 1786674648 | 27.3 | 1022.13 | 0 | 0 | 0 |
| 1786672764 | 27.7 | 1022.75 | 0 | 0 | 0 |
| 1786669630 | 28.6 | 1021 | 0 | 0 | 0 |
| 1786665884 | 29.6 | 1024.88 | 0 | 0 | 0 |
| 1786662587 | 30.5 | 1029.63 | 0 | 0 | 0 |
| 1786659758 | 31.3 | 1023.63 | 0 | 0 | 0 |
| 1786654268 | 33.2 | 1033.25 | 0 | 0 | 0 |
| 1786649188 | 35.2 | 1026.38 | 0 | 0 | 0 |
| 1786643610 | 37 | 1020.75 | 0 | 0 | 0 |
| 1786640071 | 37.1 | 1022.13 | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)