This is the latest recevied telemetry packets stored in our database for station/object DB0GH. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790673780 | 30.1 deg C | 40.6 % | 1019.7 hPa | 0 | 0 |
| 1790672880 | 29.8 deg C | 40.7 % | 1020.2 hPa | 0 | 0 |
| 1790671979 | 29.5 deg C | 40.7 % | 1019.9 hPa | 0 | 0 |
| 1790671079 | 29.4 deg C | 40.5 % | 1020.4 hPa | 0 | 0 |
| 1790670179 | 29.2 deg C | 40.4 % | 1019.6 hPa | 0 | 0 |
| 1790669279 | 28.9 deg C | 40.2 % | 1020.1 hPa | 0 | 0 |
| 1790668379 | 27.9 deg C | 40.7 % | 1020.9 hPa | 0 | 0 |
| 1790667479 | 26.4 deg C | 41.8 % | 1019.8 hPa | 0 | 0 |
| 1790666579 | 25.1 deg C | 42.7 % | 1020.4 hPa | 0 | 0 |
| 1790665679 | 24.1 deg C | 43.4 % | 1021.9 hPa | 0 | 0 |
| 1790664779 | 23 deg C | 44.2 % | 1021.2 hPa | 0 | 0 |
| 1790663879 | 21.8 deg C | 45.1 % | 1021.8 hPa | 0 | 0 |
| 1790662978 | 20.5 deg C | 46.1 % | 1018.5 hPa | 0 | 0 |
| 1790662078 | 19.3 deg C | 47.2 % | 1020.9 hPa | 0 | 0 |
| 1790661178 | 18.7 deg C | 47.7 % | 1020.4 hPa | 0 | 0 |
| 1790660284 | 18.4 deg C | 47.9 % | 1021.4 hPa | 0 | 0 |
| 1790659378 | 18.4 deg C | 47.9 % | 1021.1 hPa | 0 | 0 |
| 1790658478 | 18.4 deg C | 47.9 % | 1020.4 hPa | 0 | 0 |
| 1790657578 | 18.6 deg C | 47.8 % | 1020.6 hPa | 0 | 0 |
| 1790656678 | 18.9 deg C | 47.5 % | 1020.9 hPa | 0 | 0 |
| 1790655778 | 19.1 deg C | 47.5 % | 1020.2 hPa | 0 | 0 |
| 1790654877 | 19.2 deg C | 47.4 % | 1021.1 hPa | 0 | 0 |
| 1790653977 | 19.4 deg C | 47.3 % | 1020.6 hPa | 0 | 0 |
| 1790653077 | 19.5 deg C | 47.2 % | 1020.1 hPa | 0 | 0 |
| 1790652177 | 19.6 deg C | 47.1 % | 1020.7 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)