APRS Track Direct

My position About ☰

reset

N0JD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N0JD. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx_10min*	%Drop_10min*	%Direct_10min*	RxAltFreq_10min*
1774108449	105 Pkts	15.24 %	58.1 %	60 Pkts
1774107849	109 Pkts	11.93 %	63.3 %	74 Pkts
1774107249	126 Pkts	17.46 %	61.9 %	78 Pkts
1774106649	100 Pkts	19 %	64 %	60 Pkts
1774106049	136 Pkts	13.24 %	69.12 %	94 Pkts
1774105449	115 Pkts	16.52 %	60 %	67 Pkts
1774104849	119 Pkts	17.65 %	66.39 %	78 Pkts
1774104249	124 Pkts	12.1 %	71.77 %	88 Pkts
1774103649	145 Pkts	15.17 %	64.83 %	92 Pkts
1774103049	88 Pkts	35.61 %	43.44 %	27 Pkts
1774102449	72 Pkts	48.61 %	19.44 %	0 Pkts
1774101849	84 Pkts	50 %	13.1 %	0 Pkts
1774101249	86 Pkts	51.16 %	13.95 %	0 Pkts
1774100649	79 Pkts	48.1 %	17.72 %	0 Pkts
1774100049	97 Pkts	55.67 %	14.43 %	0 Pkts
1774099449	100 Pkts	47 %	15 %	0 Pkts
1774098849	80 Pkts	46.25 %	16.25 %	1 Pkts
1774098249	92 Pkts	52.17 %	15.22 %	0 Pkts
1774097649	95 Pkts	50.53 %	21.05 %	0 Pkts
1774097049	92 Pkts	50 %	16.3 %	0 Pkts
1774096449	89 Pkts	52.81 %	11.24 %	0 Pkts
1774095849	79 Pkts	53.16 %	17.72 %	0 Pkts
1774095249	82 Pkts	45.57 %	20.46 %	0 Pkts
1774094649	79 Pkts	45.57 %	16.46 %	0 Pkts
1774094049	111 Pkts	51.48 %	23.91 %	0 Pkts

*Used Equation Coefficients:

Rx_10min: 0, 1, 0

RxSat_10min: 0, 1, 0

%Drop_10min: 0, 1, 0.238095

%Direct_10min: 0, 1, 0.095238

RxAltFreq_10min: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)