This is the latest recevied telemetry packets stored in our database for station/object HS8KF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
---|---|---|---|---|---|
1718712092 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 0 % |
1718711470 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 1 % |
1718710849 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 4 % |
1718710226 | 0 Pkt | 0 Pkt | 0 Pkt | -55 dBm | 11 % |
1718709604 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 18 % |
1718708983 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 24 % |
1718708361 | 0 Pkt | 0 Pkt | 0 Pkt | -55 dBm | 29 % |
1718707738 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 35 % |
1718707116 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 36 % |
1718706494 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 39 % |
1718705872 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 40 % |
1718705250 | 0 Pkt | 0 Pkt | 0 Pkt | -53 dBm | 42 % |
1718704628 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 44 % |
1718704006 | 0 Pkt | 0 Pkt | 0 Pkt | -55 dBm | 49 % |
1718703385 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 58 % |
1718702762 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 68 % |
1718702140 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 59 % |
1718701518 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 66 % |
1718700896 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 55 % |
1718700274 | 0 Pkt | 0 Pkt | 0 Pkt | -53 dBm | 62 % |
1718699652 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 69 % |
1718699030 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 73 % |
1718698408 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 72 % |
1718697786 | 2 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 72 % |
1718697164 | 24 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 71 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)