This is the latest recevied telemetry packets stored in our database for station/object OE9DGV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1745051159 | 26.3 deg C | 35.9 % | 1007.3 hPa | 0 | 0 |
| 1745050259 | 23.9 deg C | 38.3 % | 1007.8 hPa | 0 | 0 |
| 1745049359 | 23.9 deg C | 38.9 % | 1007.9 hPa | 0 | 0 |
| 1745048460 | 23.2 deg C | 40.1 % | 1008.2 hPa | 0 | 0 |
| 1745047559 | 23.4 deg C | 39.6 % | 1008.1 hPa | 0 | 0 |
| 1745046659 | 20.4 deg C | 44.8 % | 1009 hPa | 0 | 0 |
| 1745045759 | 18.6 deg C | 49.6 % | 1009.6 hPa | 0 | 0 |
| 1745044859 | 14.7 deg C | 60 % | 1010.3 hPa | 0 | 0 |
| 1745043959 | 14.5 deg C | 61.2 % | 1010.3 hPa | 0 | 0 |
| 1745043059 | 10.8 deg C | 76.8 % | 1011.1 hPa | 0 | 0 |
| 1745042158 | 6.5 deg C | 87.9 % | 1012 hPa | 0 | 0 |
| 1745041258 | 5.8 deg C | 89.4 % | 1012.1 hPa | 0 | 0 |
| 1745040358 | 5.2 deg C | 90.4 % | 1012 hPa | 0 | 0 |
| 1745039458 | 5 deg C | 91.3 % | 1012.1 hPa | 0 | 0 |
| 1745038558 | 5 deg C | 91.3 % | 1012 hPa | 0 | 0 |
| 1745037658 | 4.9 deg C | 91.8 % | 1011.9 hPa | 0 | 0 |
| 1745036758 | 4.6 deg C | 91.7 % | 1011.9 hPa | 0 | 0 |
| 1745035858 | 4.6 deg C | 91.1 % | 1012 hPa | 0 | 0 |
| 1745034958 | 4.6 deg C | 90.8 % | 1012 hPa | 0 | 0 |
| 1745034058 | 4.4 deg C | 90.2 % | 1012.1 hPa | 0 | 0 |
| 1745033158 | 5 deg C | 90 % | 1012 hPa | 0 | 0 |
| 1745032257 | 5.2 deg C | 90.9 % | 1012 hPa | 0 | 0 |
| 1745031357 | 5.1 deg C | 90.5 % | 1012.2 hPa | 0 | 0 |
| 1745030459 | 5.3 deg C | 89.4 % | 1012.1 hPa | 0 | 0 |
| 1745029557 | 5.6 deg C | 89.6 % | 1012 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)