APRS Track Direct

My position About ☰

reset

9M2MHA-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M2MHA-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1786727161	3 Pkt	25 Pkt	-64 dBm	0.04 V
1786725334	3 Pkt	24 Pkt	-64 dBm	0.04 V
1786723508	0 Pkt	0 Pkt	-65 dBm	0.04 V
1786721619	3 Pkt	12 Pkt	-64 dBm	0.04 V
1786719793	3 Pkt	42 Pkt	-65 dBm	0.04 V
1786717968	4 Pkt	14 Pkt	-64 dBm	0.04 V
1786716143	3 Pkt	42 Pkt	-65 dBm	0.04 V
1786714316	3 Pkt	14 Pkt	-67 dBm	0.04 V
1786712488	3 Pkt	24 Pkt	-66 dBm	0.04 V
1786710662	3 Pkt	12 Pkt	-66 dBm	0.04 V
1786708837	0 Pkt	2 Pkt	-66 dBm	0.04 V
1786706948	3 Pkt	40 Pkt	-71 dBm	0.04 V
1786705122	3 Pkt	27 Pkt	-67 dBm	0.04 V
1786703297	5 Pkt	34 Pkt	-69 dBm	0.04 V
1786701470	6 Pkt	22 Pkt	-67 dBm	0.04 V
1786699645	6 Pkt	12 Pkt	-62 dBm	0.04 V
1786697819	9 Pkt	53 Pkt	-66 dBm	0.04 V
1786695993	6 Pkt	20 Pkt	-68 dBm	0.04 V
1786694167	0 Pkt	0 Pkt	-68 dBm	0.04 V
1786692279	3 Pkt	17 Pkt	-68 dBm	0.04 V
1786690453	3 Pkt	26 Pkt	-68 dBm	0.04 V
1786688627	3 Pkt	22 Pkt	-69 dBm	0.04 V
1786686804	6 Pkt	38 Pkt	-68 dBm	0.04 V
1786684977	6 Pkt	78 Pkt	-67 dBm	0.04 V
1786683147	3 Pkt	23 Pkt	-69 dBm	0.04 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)