This is the latest recevied telemetry packets stored in our database for station/object SV6DBG-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786727438 | 3.92 VDC | 4.04 VDC | 0 | 0 | 0 |
| 1786726718 | 3.93 VDC | 4.12 VDC | 0 | 0 | 0 |
| 1786725998 | 3.94 VDC | 5.88 VDC | 0 | 0 | 0 |
| 1786725278 | 3.93 VDC | 6.42 VDC | 0 | 0 | 0 |
| 1786724557 | 3.93 VDC | 7.36 VDC | 0 | 0 | 0 |
| 1786723837 | 3.94 VDC | 7.38 VDC | 0 | 0 | 0 |
| 1786723117 | 3.94 VDC | 7.76 VDC | 0 | 0 | 0 |
| 1786722396 | 3.95 VDC | 7.58 VDC | 0 | 0 | 0 |
| 1786721676 | 3.96 VDC | 7.58 VDC | 0 | 0 | 0 |
| 1786720955 | 3.95 VDC | 7.38 VDC | 0 | 0 | 0 |
| 1786720235 | 3.97 VDC | 8 VDC | 0 | 0 | 0 |
| 1786719515 | 3.96 VDC | 7.4 VDC | 0 | 0 | 0 |
| 1786718795 | 3.96 VDC | 7.56 VDC | 0 | 0 | 0 |
| 1786718074 | 4.02 VDC | 3.44 VDC | 0 | 0 | 0 |
| 1786717354 | 4 VDC | 3.76 VDC | 0 | 0 | 0 |
| 1786716631 | 3.97 VDC | 5.5 VDC | 0 | 0 | 0 |
| 1786715911 | 3.95 VDC | 5.48 VDC | 0 | 0 | 0 |
| 1786715190 | 3.96 VDC | 5.56 VDC | 0 | 0 | 0 |
| 1786714470 | 3.98 VDC | 4.32 VDC | 0 | 0 | 0 |
| 1786713750 | 3.98 VDC | 3.96 VDC | 0 | 0 | 0 |
| 1786713030 | 3.98 VDC | 4.48 VDC | 0 | 0 | 0 |
| 1786712309 | 3.97 VDC | 4.22 VDC | 0 | 0 | 0 |
| 1786711589 | 3.92 VDC | 7.58 VDC | 0 | 0 | 0 |
| 1786710869 | 3.91 VDC | 7.72 VDC | 0 | 0 | 0 |
| 1786710148 | 3.9 VDC | 7.46 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)