APRS Track Direct

My position About ☰

reset

LU1VZ-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU1VZ-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RSSI*	VBAT*
1731915375	-59 dbm	2.32 V
1731914774	-58 dbm	2.28 V
1731914174	-57 dbm	2.31 V
1731913575	-58 dbm	2.32 V
1731912974	-57 dbm	2.32 V
1731912375	-57 dbm	2.32 V
1731911775	-57 dbm	2.32 V
1731911174	-57 dbm	2.38 V
1731910574	-58 dbm	2.34 V
1731909975	-59 dbm	2.33 V
1731909375	-55 dbm	2.38 V
1731908775	-57 dbm	2.33 V
1731908175	-56 dbm	2.35 V
1731907574	-56 dbm	2.36 V
1731906974	-57 dbm	2.33 V
1731906375	-57 dbm	2.36 V
1731905775	-57 dbm	2.36 V
1731905174	-57 dbm	2.38 V
1731904574	-57 dbm	2.35 V
1731903974	-56 dbm	2.38 V
1731903374	-57 dbm	2.38 V
1731902775	-57 dbm	2.38 V
1731902175	-56 dbm	2.42 V
1731901575	-57 dbm	2.38 V
1731900975	-57 dbm	2.41 V

*Used Equation Coefficients:

RSSI: 0, -1, 0

VBAT: 0, 0.01, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)