This is the latest recevied telemetry packets stored in our database for station/object KC0PDS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1753490260 | 397 | 631 | 0 | 0 | 0 |
1753488179 | 409 | 644 | 0 | 0 | 0 |
1753487817 | 408 | 644 | 0 | 0 | 0 |
1753487702 | 409 | 644 | 0 | 0 | 0 |
1753487577 | 407 | 645 | 0 | 0 | 0 |
1753487337 | 463 | 646 | 0 | 0 | 0 |
1753487217 | 462 | 646 | 0 | 0 | 0 |
1753487100 | 459 | 646 | 0 | 0 | 0 |
1753486978 | 463 | 645 | 0 | 0 | 0 |
1753486858 | 462 | 644 | 0 | 0 | 0 |
1753486741 | 417 | 644 | 0 | 0 | 0 |
1753486619 | 395 | 644 | 0 | 0 | 0 |
1753486259 | 409 | 646 | 0 | 0 | 0 |
1753486019 | 447 | 646 | 0 | 0 | 0 |
1753485899 | 426 | 645 | 0 | 0 | 0 |
1753485780 | 407 | 645 | 0 | 0 | 0 |
1753485659 | 463 | 645 | 0 | 0 | 0 |
1753485540 | 398 | 646 | 0 | 0 | 0 |
1753485304 | 409 | 646 | 0 | 0 | 0 |
1753485180 | 463 | 645 | 0 | 0 | 0 |
1753485061 | 415 | 645 | 0 | 0 | 0 |
1753484940 | 416 | 645 | 0 | 0 | 0 |
1753484820 | 419 | 645 | 0 | 0 | 0 |
1753484700 | 412 | 645 | 0 | 0 | 0 |
1753484461 | 422 | 645 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)