APRS Track Direct

My position About ☰

reset

TA2WI-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA2WI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1774463319	16 Pkt	0 Pkt	0 Pkt	-43 dBm	12.35 V
1774462710	213 Pkt	0 Pkt	0 Pkt	-44 dBm	12.35 V
1774461765	14 Pkt	0 Pkt	0 Pkt	-45 dBm	12.35 V
1774461418	195 Pkt	7 Pkt	5 Pkt	-43 dBm	12.35 V
1774460472	194 Pkt	8 Pkt	3 Pkt	-42 dBm	12.35 V
1774459531	223 Pkt	0 Pkt	2 Pkt	-42 dBm	12.37 V
1774458588	15 Pkt	0 Pkt	0 Pkt	-43 dBm	12.37 V
1774457802	177 Pkt	0 Pkt	0 Pkt	-42 dBm	12.35 V
1774456959	178 Pkt	1 Pkt	0 Pkt	-42 dBm	12.35 V
1774456020	18 Pkt	0 Pkt	0 Pkt	-42 dBm	12.35 V
1774455121	172 Pkt	0 Pkt	0 Pkt	-43 dBm	12.35 V
1774454182	202 Pkt	0 Pkt	1 Pkt	-43 dBm	12.35 V
1774453241	207 Pkt	1 Pkt	1 Pkt	-42 dBm	12.37 V
1774452298	220 Pkt	0 Pkt	2 Pkt	-42 dBm	12.35 V
1774451355	16 Pkt	0 Pkt	0 Pkt	-44 dBm	12.35 V
1774450639	206 Pkt	0 Pkt	0 Pkt	-43 dBm	12.35 V
1774449696	233 Pkt	0 Pkt	0 Pkt	-42 dBm	12.35 V
1774448754	226 Pkt	0 Pkt	0 Pkt	-43 dBm	12.35 V
1774447805	181 Pkt	4 Pkt	18 Pkt	-43 dBm	12.35 V
1774446864	206 Pkt	7 Pkt	2 Pkt	-42 dBm	12.35 V
1774445920	9 Pkt	1 Pkt	7 Pkt	-43 dBm	12.35 V
1774445539	219 Pkt	0 Pkt	1 Pkt	-43 dBm	12.35 V
1774444596	13 Pkt	0 Pkt	0 Pkt	-41 dBm	12.35 V
1774443666	231 Pkt	0 Pkt	1 Pkt	-41 dBm	12.35 V
1774442698	226 Pkt	0 Pkt	0 Pkt	-42 dBm	12.35 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)