This is the latest recevied telemetry packets stored in our database for station/object ON7DE-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satelites* | Battery* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1751386743 | 14 Nr | 13.54 Vdc | 0 | 0 | 0 |
| 1751386628 | 12 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1751386608 | 12 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1751386598 | 13 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1751386573 | 13 Nr | 13.55 Vdc | 0 | 0 | 0 |
| 1751386553 | 13 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1751386513 | 12 Nr | 13.55 Vdc | 0 | 0 | 0 |
| 1751386503 | 14 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1751386498 | 15 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1751386493 | 12 Nr | 13.59 Vdc | 0 | 0 | 0 |
| 1751386488 | 12 Nr | 13.59 Vdc | 0 | 0 | 0 |
| 1751386483 | 13 Nr | 13.55 Vdc | 0 | 0 | 0 |
| 1751386458 | 12 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1751386453 | 13 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1751386443 | 14 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1751386438 | 15 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1751386428 | 12 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1751386418 | 13 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1751386413 | 12 Nr | 13.59 Vdc | 0 | 0 | 0 |
| 1751386393 | 12 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1751386383 | 12 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1751386373 | 13 Nr | 13.59 Vdc | 0 | 0 | 0 |
| 1751386353 | 15 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1751386348 | 13 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1751386343 | 14 Nr | 13.59 Vdc | 0 | 0 | 0 |
*Used Equation Coefficients:
Satelites: 0, 1, 0
Battery: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)