This is the latest recevied telemetry packets stored in our database for station/object F5OPV-P2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774113371 | 5.2 | 18.8 | 53 | 1014 | 42 |
| 1774112192 | 5.2 | 18.8 | 53 | 1014 | 42 |
| 1774111000 | 5.2 | 18.8 | 53 | 1014 | 42 |
| 1774109818 | 5.2 | 18.9 | 53 | 1014 | 42 |
| 1774108641 | 5.24 | 18.9 | 53 | 1014 | 42 |
| 1774107448 | 5.2 | 18.9 | 53 | 1014 | 42 |
| 1774106267 | 5.2 | 18.9 | 53 | 1014 | 42 |
| 1774105090 | 5.24 | 18.9 | 53 | 1014 | 42 |
| 1774102718 | 5.2 | 19 | 53 | 1015 | 42 |
| 1774101540 | 5.24 | 19 | 53 | 1015 | 42 |
| 1774100347 | 5.2 | 19 | 53 | 1015 | 42 |
| 1774099167 | 5.2 | 19.1 | 53 | 1015 | 42 |
| 1774097989 | 5.24 | 19.1 | 53 | 1015 | 42 |
| 1774096796 | 5.2 | 19.1 | 53 | 1016 | 42 |
| 1774095616 | 5.2 | 19.2 | 53 | 1016 | 42 |
| 1774094438 | 5.24 | 19.2 | 53 | 1016 | 42 |
| 1774093246 | 5.2 | 19.3 | 53 | 1016 | 42 |
| 1774092066 | 5.2 | 19.4 | 53 | 1016 | 42 |
| 1774090887 | 5.24 | 19.5 | 53 | 1016 | 42 |
| 1774089695 | 5.2 | 19.5 | 52 | 1016 | 42 |
| 1774088515 | 5.2 | 19.6 | 52 | 1017 | 42 |
| 1774087338 | 5.24 | 19.6 | 52 | 1017 | 42 |
| 1774086145 | 5.2 | 19.7 | 52 | 1017 | 42 |
| 1774084965 | 5.2 | 19.8 | 52 | 1017 | 42 |
| 1774083787 | 5.24 | 19.9 | 52 | 1017 | 42 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)