APRS Track Direct

My position About ☰

reset

YC2SNK-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YC2SNK-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V_Bat*	V_Ext?*	Value3*	Value4*	Value5*
1782567733	0 VDC	0 VDC@	0	0	0
1782566829	0 VDC	0 VDC@	0	0	0
1782556456	0 VDC	0 VDC@	0	0	0
1782556014	0 VDC	0 VDC@	0	0	0
1782555110	0 VDC	0 VDC@	0	0	0
1782553303	0 VDC	0 VDC@	0	0	0
1782551497	0 VDC	0 VDC@	0	0	0
1782548011	0 VDC	0 VDC@	0	0	0
1782547996	0 VDC	0 VDC@	0	0	0
1782547981	0 VDC	0 VDC@	0	0	0
1782547933	0 VDC	0 VDC@	0	0	0
1782547918	0 VDC	0 VDC@	0	0	0
1782547826	0 VDC	0 VDC@	0	0	0
1782547811	0 VDC	0 VDC@	0	0	0
1782547744	0 VDC	0 VDC@	0	0	0
1782547725	0 VDC	0 VDC@	0	0	0
1782547686	0 VDC	0 VDC@	0	0	0
1782547671	0 VDC	0 VDC@	0	0	0
1782547625	0 VDC	0 VDC@	0	0	0
1782547595	0 VDC	0 VDC@	0	0	0
1782547495	0 VDC	0 VDC@	0	0	0
1782547476	0 VDC	0 VDC@	0	0	0
1782547461	0 VDC	0 VDC@	0	0	0
1782547384	0 VDC	0 VDC@	0	0	0
1782547358	0 VDC	0 VDC@	0	0	0

*Used Equation Coefficients:

V_Bat: 0, 0.01, 0

V_Ext?: 0, 0.02, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)