APRS Track Direct

My position About ☰

reset

YM2KAP Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM2KAP. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1744110544	13.25 Volt	740 Pkt	310 Pkt	70 Pcnt	77 Pcnt
1744109944	13.17 Volt	750 Pkt	330 Pkt	70 Pcnt	77 Pcnt
1744109347	13.17 Volt	750 Pkt	320 Pkt	69 Pcnt	77 Pcnt
1744108742	13.17 Volt	750 Pkt	330 Pkt	68 Pcnt	77 Pcnt
1744108142	13.1 Volt	740 Pkt	320 Pkt	66 Pcnt	77 Pcnt
1744107543	13.25 Volt	730 Pkt	310 Pkt	66 Pcnt	77 Pcnt
1744106942	13.17 Volt	720 Pkt	300 Pkt	66 Pcnt	77 Pcnt
1744106341	13.17 Volt	730 Pkt	300 Pkt	66 Pcnt	77 Pcnt
1744105741	13.17 Volt	720 Pkt	300 Pkt	67 Pcnt	77 Pcnt
1744105142	13.32 Volt	700 Pkt	290 Pkt	70 Pcnt	77 Pcnt
1744104540	13.32 Volt	710 Pkt	310 Pkt	70 Pcnt	77 Pcnt
1744103941	13.47 Volt	730 Pkt	310 Pkt	71 Pcnt	77 Pcnt
1744103337	13.39 Volt	750 Pkt	330 Pkt	72 Pcnt	77 Pcnt
1744102742	13.25 Volt	740 Pkt	330 Pkt	73 Pcnt	77 Pcnt
1744102136	13.32 Volt	770 Pkt	340 Pkt	73 Pcnt	77 Pcnt
1744101535	13.25 Volt	800 Pkt	350 Pkt	70 Pcnt	77 Pcnt
1744100935	13.39 Volt	820 Pkt	340 Pkt	70 Pcnt	77 Pcnt
1744100334	13.39 Volt	760 Pkt	310 Pkt	69 Pcnt	77 Pcnt
1744099737	13.25 Volt	720 Pkt	290 Pkt	69 Pcnt	77 Pcnt
1744099133	13.17 Volt	740 Pkt	270 Pkt	68 Pcnt	77 Pcnt
1744098533	12.95 Volt	720 Pkt	260 Pkt	66 Pcnt	77 Pcnt
1744097934	12.8 Volt	740 Pkt	260 Pkt	67 Pcnt	77 Pcnt
1744097333	12.58 Volt	730 Pkt	270 Pkt	68 Pcnt	77 Pcnt
1744096732	12.58 Volt	780 Pkt	290 Pkt	69 Pcnt	77 Pcnt
1744096135	12.58 Volt	810 Pkt	290 Pkt	69 Pcnt	77 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.074, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)