APRS Track Direct

My position About ☰

reset

DB6TOM-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB6TOM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1766171912	12.09 Volt	100 Pkt	40 Pkt	99 Pcnt
1766171612	12.01 Volt	110 Pkt	40 Pkt	99 Pcnt
1766171312	12.09 Volt	100 Pkt	40 Pkt	100 Pcnt
1766171012	12.01 Volt	110 Pkt	40 Pkt	100 Pcnt
1766170712	12.09 Volt	110 Pkt	40 Pkt	100 Pcnt
1766170412	12.09 Volt	110 Pkt	40 Pkt	100 Pcnt
1766170112	12.09 Volt	110 Pkt	30 Pkt	100 Pcnt
1766169812	12.09 Volt	120 Pkt	40 Pkt	98 Pcnt
1766169512	12.09 Volt	120 Pkt	40 Pkt	98 Pcnt
1766169212	12.01 Volt	120 Pkt	30 Pkt	98 Pcnt
1766168912	12.09 Volt	130 Pkt	40 Pkt	97 Pcnt
1766168612	12.09 Volt	130 Pkt	30 Pkt	97 Pcnt
1766168312	12.09 Volt	130 Pkt	30 Pkt	97 Pcnt
1766168012	12.01 Volt	140 Pkt	30 Pkt	98 Pcnt
1766167712	12.09 Volt	150 Pkt	40 Pkt	98 Pcnt
1766167412	12.01 Volt	150 Pkt	40 Pkt	98 Pcnt
1766167112	12.09 Volt	150 Pkt	40 Pkt	98 Pcnt
1766166812	12.09 Volt	150 Pkt	40 Pkt	98 Pcnt
1766166512	12.01 Volt	150 Pkt	40 Pkt	97 Pcnt
1766166212	12.09 Volt	150 Pkt	40 Pkt	98 Pcnt
1766165912	12.09 Volt	150 Pkt	40 Pkt	98 Pcnt
1766165612	12.09 Volt	150 Pkt	30 Pkt	98 Pcnt
1766165312	12.09 Volt	150 Pkt	40 Pkt	99 Pcnt
1766165012	12.09 Volt	150 Pkt	40 Pkt	99 Pcnt
1766164712	12.01 Volt	140 Pkt	40 Pkt	99 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)