APRS Track Direct

My position About ☰

reset

K5DLF-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K5DLF-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1790655570	14.63 Volt	260 Pkt	20 Pkt	52 Pcnt
1790654973	14.7 Volt	220 Pkt	20 Pkt	47 Pcnt
1790654371	14.63 Volt	250 Pkt	30 Pkt	50 Pcnt
1790653170	14.63 Volt	250 Pkt	40 Pkt	56 Pcnt
1790651376	14.7 Volt	310 Pkt	40 Pkt	69 Pcnt
1790650770	14.63 Volt	350 Pkt	40 Pkt	71 Pcnt
1790650171	14.63 Volt	370 Pkt	40 Pkt	70 Pcnt
1790648971	14.7 Volt	400 Pkt	50 Pkt	69 Pcnt
1790648371	14.63 Volt	400 Pkt	60 Pkt	67 Pcnt
1790647774	14.7 Volt	350 Pkt	40 Pkt	63 Pcnt
1790647171	14.63 Volt	330 Pkt	30 Pkt	64 Pcnt
1790646571	14.7 Volt	310 Pkt	30 Pkt	62 Pcnt
1790645971	14.63 Volt	290 Pkt	30 Pkt	61 Pcnt
1790645371	14.7 Volt	340 Pkt	30 Pkt	64 Pcnt
1790644771	14.7 Volt	370 Pkt	40 Pkt	65 Pcnt
1790642971	14.7 Volt	360 Pkt	50 Pkt	66 Pcnt
1790642372	14.03 Volt	370 Pkt	50 Pkt	65 Pcnt
1790641771	14.7 Volt	350 Pkt	50 Pkt	64 Pcnt
1790640577	14.63 Volt	290 Pkt	30 Pkt	65 Pcnt
1790639971	14.7 Volt	340 Pkt	30 Pkt	68 Pcnt
1790639373	14.7 Volt	330 Pkt	30 Pkt	67 Pcnt
1790638771	14.7 Volt	300 Pkt	20 Pkt	68 Pcnt
1790638171	14.63 Volt	290 Pkt	30 Pkt	67 Pcnt
1790636976	14.63 Volt	280 Pkt	30 Pkt	64 Pcnt
1790636371	14.63 Volt	270 Pkt	30 Pkt	63 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)