APRS Track Direct

My position About ☰

reset

OZ7CER-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OZ7CER-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732248148	13.9 Volt	290 Pkt	80 Pkt	53 Pcnt
1732248148	13.9 Volt	290 Pkt	80 Pkt	53 Pcnt
1732247848	13.9 Volt	290 Pkt	80 Pkt	54 Pcnt
1732247847	13.9 Volt	290 Pkt	80 Pkt	54 Pcnt
1732247549	13.9 Volt	310 Pkt	80 Pkt	55 Pcnt
1732247547	13.9 Volt	310 Pkt	80 Pkt	55 Pcnt
1732247248	13.9 Volt	300 Pkt	80 Pkt	56 Pcnt
1732247247	13.9 Volt	300 Pkt	80 Pkt	56 Pcnt
1732246947	13.9 Volt	300 Pkt	80 Pkt	54 Pcnt
1732246947	13.9 Volt	300 Pkt	80 Pkt	54 Pcnt
1732246647	13.9 Volt	300 Pkt	80 Pkt	54 Pcnt
1732246646	13.9 Volt	300 Pkt	80 Pkt	54 Pcnt
1732246347	13.9 Volt	300 Pkt	80 Pkt	54 Pcnt
1732246346	13.9 Volt	300 Pkt	80 Pkt	54 Pcnt
1732246046	13.9 Volt	310 Pkt	80 Pkt	56 Pcnt
1732246046	13.9 Volt	310 Pkt	80 Pkt	56 Pcnt
1732245746	13.9 Volt	320 Pkt	80 Pkt	56 Pcnt
1732245745	13.9 Volt	320 Pkt	80 Pkt	56 Pcnt
1732245447	13.9 Volt	330 Pkt	80 Pkt	58 Pcnt
1732245445	13.9 Volt	330 Pkt	80 Pkt	58 Pcnt
1732245150	13.9 Volt	330 Pkt	80 Pkt	58 Pcnt
1732245145	13.9 Volt	330 Pkt	80 Pkt	58 Pcnt
1732244846	13.9 Volt	320 Pkt	80 Pkt	57 Pcnt
1732244845	13.9 Volt	320 Pkt	80 Pkt	57 Pcnt
1732244548	13.9 Volt	320 Pkt	80 Pkt	57 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)