This is the latest recevied telemetry packets stored in our database for station/object EL-IU8UOQ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1778009071 | 0 | 0 | 0 | 0 | 0 |
| 1778008471 | 0 | 0 | 0 | 0 | 0 |
| 1778007871 | 0 | 0 | 0 | 0 | 0 |
| 1778007271 | 0 | 0 | 0 | 0 | 0 |
| 1778006671 | 122 | 97 | 6 | 5 | 0 |
| 1778006071 | 261 | 197 | 18 | 18 | 0 |
| 1778005471 | 50 | 23 | 5 | 2 | 0 |
| 1778004871 | 220 | 119 | 13 | 10 | 0 |
| 1778004271 | 297 | 138 | 16 | 14 | 0 |
| 1778003671 | 518 | 199 | 16 | 11 | 0 |
| 1778003071 | 369 | 73 | 18 | 3 | 0 |
| 1778002471 | 704 | 219 | 32 | 5 | 0 |
| 1778001871 | 861 | 38 | 42 | 2 | 0 |
| 1778001271 | 760 | 109 | 38 | 3 | 0 |
| 1778000671 | 564 | 204 | 43 | 8 | 0 |
| 1778000071 | 523 | 255 | 28 | 16 | 0 |
| 1777999471 | 558 | 128 | 59 | 8 | 0 |
| 1777998871 | 191 | 158 | 18 | 10 | 0 |
| 1777998271 | 403 | 106 | 21 | 7 | 0 |
| 1777997671 | 675 | 177 | 53 | 3 | 0 |
| 1777997071 | 714 | 94 | 69 | 6 | 0 |
| 1777996471 | 308 | 1 | 45 | 1 | 0 |
| 1777995871 | 147 | 0 | 32 | 0 | 0 |
| 1777995271 | 0 | 0 | 0 | 0 | 0 |
| 1777994671 | 4 | 0 | 2 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)