APRS Track Direct

My position About ☰

reset

W0RFP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W0RFP-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	DC*	Rx1h*	Dg1h*	Eff1h*	Temp*
1745131347	13.95 V	130 Pkt	80 Pkt	98 Pcnt	24 F
1745131047	13.95 V	130 Pkt	70 Pkt	98 Pcnt	24 F
1745130747	13.95 V	130 Pkt	80 Pkt	97 Pcnt	24 F
1745130448	13.95 V	120 Pkt	70 Pkt	97 Pcnt	24 F
1745130148	13.95 V	130 Pkt	70 Pkt	97 Pcnt	25 F
1745129848	13.95 V	130 Pkt	70 Pkt	98 Pcnt	25 F
1745129548	13.95 V	130 Pkt	70 Pkt	98 Pcnt	25 F
1745129248	13.95 V	120 Pkt	70 Pkt	98 Pcnt	25 F
1745128948	13.95 V	130 Pkt	70 Pkt	98 Pcnt	25 F
1745128648	13.95 V	120 Pkt	70 Pkt	98 Pcnt	25 F
1745128348	13.95 V	120 Pkt	70 Pkt	98 Pcnt	25 F
1745128048	13.95 V	110 Pkt	60 Pkt	99 Pcnt	25 F
1745127748	13.95 V	110 Pkt	70 Pkt	99 Pcnt	25 F
1745127448	13.95 V	100 Pkt	70 Pkt	99 Pcnt	25 F
1745127148	13.95 V	110 Pkt	70 Pkt	100 Pcnt	25 F
1745126848	13.95 V	100 Pkt	70 Pkt	100 Pcnt	25 F
1745126548	13.95 V	110 Pkt	70 Pkt	100 Pcnt	26 F
1745126248	13.95 V	110 Pkt	70 Pkt	100 Pcnt	26 F
1745125948	13.95 V	110 Pkt	70 Pkt	100 Pcnt	26 F
1745125648	13.95 V	100 Pkt	60 Pkt	100 Pcnt	26 F
1745125348	13.95 V	110 Pkt	70 Pkt	100 Pcnt	26 F
1745125048	13.95 V	100 Pkt	70 Pkt	100 Pcnt	27 F
1745124748	13.95 V	100 Pkt	70 Pkt	100 Pcnt	27 F
1745124448	13.95 V	100 Pkt	70 Pkt	100 Pcnt	27 F
1745124148	14.03 V	110 Pkt	70 Pkt	100 Pcnt	27 F

*Used Equation Coefficients:

DC: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 1, -100

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)