This is the latest recevied telemetry packets stored in our database for station/object DF3OT-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786728314 | 31.3 deg C | 35.8 % | 1013.7 hPa | 0 | 0 |
| 1786727983 | 31.5 deg C | 35.9 % | 1012.4 hPa | 0 | 0 |
| 1786727083 | 32.1 deg C | 31 % | 1012.6 hPa | 0 | 0 |
| 1786726183 | 32.4 deg C | 28.6 % | 1013 hPa | 0 | 0 |
| 1786725282 | 32.7 deg C | 28.3 % | 1013.7 hPa | 0 | 0 |
| 1786724382 | 33.1 deg C | 26.1 % | 1012.7 hPa | 0 | 0 |
| 1786723482 | 32.8 deg C | 28 % | 1014.6 hPa | 0 | 0 |
| 1786722582 | 32.9 deg C | 27.5 % | 1014.6 hPa | 0 | 0 |
| 1786721682 | 32.5 deg C | 28.5 % | 1015.5 hPa | 0 | 0 |
| 1786720782 | 30.9 deg C | 31.9 % | 1015 hPa | 0 | 0 |
| 1786719882 | 31 deg C | 32.8 % | 1015 hPa | 0 | 0 |
| 1786718982 | 31.1 deg C | 31.9 % | 1014.7 hPa | 0 | 0 |
| 1786718082 | 31.1 deg C | 32.1 % | 1014.5 hPa | 0 | 0 |
| 1786717181 | 31.1 deg C | 31.7 % | 1015.4 hPa | 0 | 0 |
| 1786716281 | 31.1 deg C | 31.9 % | 1015.5 hPa | 0 | 0 |
| 1786715951 | 31 deg C | 31.9 % | 1015.4 hPa | 0 | 0 |
| 1786715051 | 31 deg C | 32.3 % | 1014 hPa | 0 | 0 |
| 1786714151 | 31 deg C | 32.3 % | 1016 hPa | 0 | 0 |
| 1786713251 | 30.9 deg C | 32.5 % | 1015.8 hPa | 0 | 0 |
| 1786712351 | 30.8 deg C | 32 % | 1014.6 hPa | 0 | 0 |
| 1786711451 | 30.8 deg C | 32.8 % | 1014.5 hPa | 0 | 0 |
| 1786710550 | 30.8 deg C | 33.2 % | 1016.3 hPa | 0 | 0 |
| 1786709650 | 30.6 deg C | 33.5 % | 1016.3 hPa | 0 | 0 |
| 1786708750 | 30.4 deg C | 33.6 % | 1016.3 hPa | 0 | 0 |
| 1786707850 | 30.3 deg C | 32.8 % | 1017.6 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)