APRS Track Direct

My position About ☰

reset

CHLSEA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object CHLSEA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274671	12.38 Volt	1030 Pkt	350 Pkt	66 Pcnt
1836274521	12.38 Volt	1020 Pkt	340 Pkt	65 Pcnt
1836274370	12.38 Volt	1040 Pkt	360 Pkt	66 Pcnt
1836274221	12.38 Volt	1020 Pkt	350 Pkt	65 Pcnt
1836274070	12.38 Volt	1040 Pkt	360 Pkt	66 Pcnt
1770125776	12.3 Volt	670 Pkt	250 Pkt	68 Pcnt
1770125476	12.3 Volt	680 Pkt	260 Pkt	68 Pcnt
1770125175	12.3 Volt	670 Pkt	260 Pkt	67 Pcnt
1770124875	12.3 Volt	680 Pkt	270 Pkt	68 Pcnt
1770124575	12.3 Volt	680 Pkt	270 Pkt	68 Pcnt
1770124275	12.3 Volt	690 Pkt	260 Pkt	68 Pcnt
1770123974	12.3 Volt	690 Pkt	260 Pkt	68 Pcnt
1770123674	12.3 Volt	690 Pkt	250 Pkt	69 Pcnt
1770123374	12.3 Volt	690 Pkt	250 Pkt	69 Pcnt
1770123073	12.3 Volt	700 Pkt	250 Pkt	69 Pcnt
1770122773	12.3 Volt	690 Pkt	250 Pkt	68 Pcnt
1770122473	12.3 Volt	700 Pkt	250 Pkt	69 Pcnt
1770122173	12.3 Volt	700 Pkt	250 Pkt	68 Pcnt
1770121872	12.3 Volt	700 Pkt	240 Pkt	68 Pcnt
1770121572	12.3 Volt	700 Pkt	250 Pkt	69 Pcnt
1770121272	12.3 Volt	690 Pkt	250 Pkt	67 Pcnt
1770120971	12.3 Volt	680 Pkt	260 Pkt	67 Pcnt
1770120671	12.3 Volt	680 Pkt	260 Pkt	66 Pcnt
1770120371	12.3 Volt	670 Pkt	260 Pkt	66 Pcnt
1770120071	12.38 Volt	660 Pkt	260 Pkt	65 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp1: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)