APRS Track Direct

My position About ☰

reset

OE7XXR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE7XXR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Efftl*	Eff1h*	Temp*
1836274619	13.73 Volt	20 Pkt	44 Pcnt	41 Pcnt	18 C
1836274470	13.73 Volt	30 Pkt	44 Pcnt	41 Pcnt	18 C
1836274319	13.73 Volt	20 Pkt	44 Pcnt	41 Pcnt	18 C
1836274169	13.73 Volt	30 Pkt	44 Pcnt	41 Pcnt	18 C
1836274018	13.73 Volt	20 Pkt	44 Pcnt	41 Pcnt	18 C
1762320267	13.8 Volt	20 Pkt	47 Pcnt	32 Pcnt	8.5 C
1762319967	13.8 Volt	20 Pkt	47 Pcnt	29 Pcnt	9 C
1762319667	13.8 Volt	20 Pkt	47 Pcnt	30 Pcnt	9 C
1762319367	13.8 Volt	20 Pkt	47 Pcnt	31 Pcnt	9 C
1762319066	13.8 Volt	20 Pkt	47 Pcnt	35 Pcnt	9 C
1762318766	13.8 Volt	20 Pkt	47 Pcnt	36 Pcnt	8.5 C
1762318466	13.8 Volt	20 Pkt	47 Pcnt	36 Pcnt	9 C
1762318165	13.8 Volt	20 Pkt	47 Pcnt	39 Pcnt	8.5 C
1762317865	13.8 Volt	20 Pkt	47 Pcnt	41 Pcnt	9 C
1762317565	13.8 Volt	20 Pkt	47 Pcnt	40 Pcnt	8.5 C
1762317264	13.8 Volt	20 Pkt	47 Pcnt	35 Pcnt	9 C
1762316964	13.8 Volt	20 Pkt	47 Pcnt	35 Pcnt	8.5 C
1762316664	13.8 Volt	20 Pkt	47 Pcnt	34 Pcnt	8.5 C
1762316364	13.8 Volt	20 Pkt	47 Pcnt	37 Pcnt	9 C
1762316063	13.8 Volt	30 Pkt	47 Pcnt	38 Pcnt	9 C
1762315763	13.8 Volt	30 Pkt	47 Pcnt	40 Pcnt	9.5 C
1762315463	13.8 Volt	20 Pkt	47 Pcnt	36 Pcnt	9.5 C
1762315162	13.8 Volt	30 Pkt	47 Pcnt	36 Pcnt	8.5 C
1762314863	13.8 Volt	20 Pkt	47 Pcnt	33 Pcnt	8.5 C
1762314562	13.8 Volt	20 Pkt	47 Pcnt	31 Pcnt	8.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Efftl: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)