This is the latest recevied telemetry packets stored in our database for station/object 9M2FUL-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BARO* | BAT* | SAT* |
|---|---|---|---|---|---|
| 1750160000 | 33.56 C | 36.6 % | 1010 hPa | 23 V | 3 SAT |
| 1750159127 | 33.65 C | 37.9 % | 1010 hPa | 25 V | 3 SAT |
| 1750151182 | 33.11 C | 36.1 % | 1008 hPa | 34 V | 3 SAT |
| 1750151128 | 32.93 C | 35.9 % | 1008 hPa | 35 V | 3 SAT |
| 1750150986 | 32.54 C | 35.5 % | 1008 hPa | 33 V | 3 SAT |
| 1750150972 | 32.5 C | 35.5 % | 1008 hPa | 33 V | 3 SAT |
| 1750150927 | 32.36 C | 35.4 % | 1008 hPa | 33 V | 3 SAT |
| 1750150903 | 32.29 C | 35.3 % | 1008 hPa | 33 V | 3 SAT |
| 1750150878 | 32.24 C | 35.3 % | 1008 hPa | 33 V | 3 SAT |
| 1750150865 | 32.18 C | 35.2 % | 1008 hPa | 32 V | 3 SAT |
| 1750144789 | 31.45 C | 29.7 % | 1009 hPa | 4 V | 0 SAT |
| 1750144759 | 31.45 C | 29.8 % | 1009 hPa | 4 V | 0 SAT |
| 1750144683 | 31.47 C | 29.8 % | 1009 hPa | 40 V | 0 SAT |
| 1750144619 | 31.47 C | 29.9 % | 1009 hPa | 40 V | 0 SAT |
| 1750144553 | 31.5 C | 30 % | 1009 hPa | 4 V | 0 SAT |
| 1750144495 | 31.57 C | 30 % | 1009 hPa | 4 V | 0 SAT |
| 1750144415 | 31.7 C | 29.3 % | 1009 hPa | 3 V | 0 SAT |
| 1750144296 | 31.37 C | 30.3 % | 1008 hPa | 4 V | 0 SAT |
| 1750144181 | 31.45 C | 304 % | 1009 hPa | 4 V | 0 SAT |
| 1750144118 | 31.51 C | 304 % | 1009 hPa | 4 V | 0 SAT |
| 1750144051 | 31.62 C | 30 % | 1009 hPa | 3 V | 0 SAT |
| 1750143867 | 31.42 C | 31 % | 1009 hPa | 4 V | 10 SAT |
| 1750143841 | 31.43 C | 305 % | 1009 hPa | 4 V | 8 SAT |
| 1750143778 | 31.45 C | 305 % | 1009 hPa | 4 V | 9 SAT |
| 1750143715 | 31.46 C | 3064 % | 1009 hPa | 4 V | 9 SAT |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
BARO: 0, 1, 0
BAT: 0, 1, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)