APRS Track Direct

My position About ☰

reset

SA0AZS-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SA0AZS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1836274280	0.93 Load	49.77 DegC	156 Mb	10690 Pkt	492 Pkt
1836274131	1.05 Load	49.23 DegC	156 Mb	10786 Pkt	497 Pkt
1774110575	0.78 Load	49.77 DegC	96 Mb	13625 Pkt	1022 Pkt
1774109676	0.74 Load	49.23 DegC	96 Mb	14326 Pkt	1072 Pkt
1774108776	0.81 Load	48.69 DegC	96 Mb	11928 Pkt	986 Pkt
1774107879	0.76 Load	49.23 DegC	96 Mb	12385 Pkt	991 Pkt
1774106978	0.75 Load	49.23 DegC	96 Mb	12198 Pkt	995 Pkt
1774106075	0.88 Load	49.77 DegC	96 Mb	12594 Pkt	1006 Pkt
1774105175	0.75 Load	49.77 DegC	96 Mb	13033 Pkt	1022 Pkt
1774104275	0.73 Load	50.84 DegC	96 Mb	12862 Pkt	1047 Pkt
1774103375	0.88 Load	49.77 DegC	96 Mb	11841 Pkt	967 Pkt
1774102476	0.86 Load	50.31 DegC	96 Mb	12728 Pkt	1021 Pkt
1774101576	0.79 Load	49.77 DegC	96 Mb	12761 Pkt	1043 Pkt
1774100676	0.79 Load	50.31 DegC	96 Mb	13478 Pkt	1024 Pkt
1774099785	0.79 Load	50.84 DegC	96 Mb	13070 Pkt	1061 Pkt
1774098875	0.73 Load	49.77 DegC	96 Mb	12609 Pkt	1014 Pkt
1774097975	0.76 Load	50.84 DegC	96 Mb	12019 Pkt	1014 Pkt
1774097076	0.8 Load	50.84 DegC	96 Mb	12586 Pkt	1012 Pkt
1774096175	0.82 Load	50.31 DegC	96 Mb	12055 Pkt	1005 Pkt
1774095275	0.77 Load	50.31 DegC	96 Mb	12599 Pkt	1015 Pkt
1774094376	0.74 Load	50.84 DegC	96 Mb	12131 Pkt	1016 Pkt
1774093476	0.88 Load	50.84 DegC	96 Mb	10674 Pkt	922 Pkt
1774092582	0.76 Load	50.84 DegC	97 Mb	12677 Pkt	1017 Pkt
1774091678	0.81 Load	50.84 DegC	96 Mb	12737 Pkt	1023 Pkt
1774090775	0.87 Load	50.84 DegC	96 Mb	11636 Pkt	949 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)