APRS Track Direct

My position About ☰

reset

K3ORB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K3ORB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732269438	13.2 Volt	120 Pkt	20 Pkt	97 Pcnt
1732269138	13.2 Volt	120 Pkt	20 Pkt	97 Pcnt
1732268840	13.05 Volt	130 Pkt	20 Pkt	97 Pcnt
1732268838	13.05 Volt	130 Pkt	20 Pkt	97 Pcnt
1732268538	13.2 Volt	140 Pkt	20 Pkt	97 Pcnt
1732268239	13.2 Volt	140 Pkt	20 Pkt	97 Pcnt
1732268238	13.2 Volt	140 Pkt	20 Pkt	97 Pcnt
1732267938	13.2 Volt	140 Pkt	20 Pkt	97 Pcnt
1732267638	13.2 Volt	130 Pkt	20 Pkt	97 Pcnt
1732267339	13.2 Volt	130 Pkt	20 Pkt	96 Pcnt
1732267039	13.05 Volt	120 Pkt	20 Pkt	96 Pcnt
1732267038	13.05 Volt	120 Pkt	20 Pkt	96 Pcnt
1732266738	13.2 Volt	130 Pkt	20 Pkt	96 Pcnt
1732266441	13.2 Volt	130 Pkt	20 Pkt	96 Pcnt
1732266438	13.2 Volt	130 Pkt	20 Pkt	96 Pcnt
1732266138	13.2 Volt	130 Pkt	20 Pkt	96 Pcnt
1732265840	13.2 Volt	130 Pkt	20 Pkt	96 Pcnt
1732265838	13.2 Volt	130 Pkt	20 Pkt	96 Pcnt
1732265538	13.2 Volt	130 Pkt	20 Pkt	95 Pcnt
1732265241	13.05 Volt	120 Pkt	20 Pkt	96 Pcnt
1732265238	13.05 Volt	120 Pkt	20 Pkt	96 Pcnt
1732264938	13.2 Volt	120 Pkt	20 Pkt	96 Pcnt
1732264639	13.2 Volt	110 Pkt	20 Pkt	95 Pcnt
1732264638	13.2 Volt	110 Pkt	20 Pkt	95 Pcnt
1732264338	13.2 Volt	120 Pkt	20 Pkt	95 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)