APRS Track Direct

My position About ☰

reset

UR7D-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object UR7D-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732293438	14.3 Volt	400 Pkt	150 Pkt	89 Pcnt
1732293437	14.3 Volt	400 Pkt	150 Pkt	89 Pcnt
1732292838	14.22 Volt	390 Pkt	150 Pkt	89 Pcnt
1732292837	14.22 Volt	390 Pkt	150 Pkt	89 Pcnt
1732292237	14.3 Volt	360 Pkt	140 Pkt	88 Pcnt
1732292236	14.3 Volt	360 Pkt	140 Pkt	88 Pcnt
1732291640	14.3 Volt	360 Pkt	140 Pkt	87 Pcnt
1732291636	14.3 Volt	360 Pkt	140 Pkt	87 Pcnt
1732291036	14.3 Volt	370 Pkt	140 Pkt	88 Pcnt
1732291035	14.3 Volt	370 Pkt	140 Pkt	88 Pcnt
1732290435	14.22 Volt	380 Pkt	150 Pkt	88 Pcnt
1732290435	14.22 Volt	380 Pkt	150 Pkt	88 Pcnt
1732289835	14.22 Volt	390 Pkt	160 Pkt	88 Pcnt
1732289834	14.22 Volt	390 Pkt	160 Pkt	88 Pcnt
1732289233	14.22 Volt	390 Pkt	160 Pkt	88 Pcnt
1732288633	14.3 Volt	400 Pkt	160 Pkt	88 Pcnt
1732288633	14.3 Volt	400 Pkt	160 Pkt	88 Pcnt
1732288035	14.3 Volt	390 Pkt	160 Pkt	88 Pcnt
1732288032	14.3 Volt	390 Pkt	160 Pkt	88 Pcnt
1732287432	14.3 Volt	370 Pkt	150 Pkt	86 Pcnt
1732287432	14.3 Volt	370 Pkt	150 Pkt	86 Pcnt
1732286832	14.3 Volt	360 Pkt	150 Pkt	86 Pcnt
1732286831	14.3 Volt	360 Pkt	150 Pkt	86 Pcnt
1732286231	14.3 Volt	350 Pkt	140 Pkt	86 Pcnt
1732286231	14.3 Volt	350 Pkt	140 Pkt	86 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)