This is the latest recevied telemetry packets stored in our database for station/object KE8ESP-A2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | LOAD* | RAM* | SWAP* | DISK* |
|---|---|---|---|---|---|
| 1774116009 | 30 C | 0.5 x | 12 % | 0 % | 9 % |
| 1774115112 | 31 C | 1.1 x | 12 % | 0 % | 9 % |
| 1774114212 | 36 C | 0.3 x | 11 % | 0 % | 9 % |
| 1774113312 | 34 C | 0.7 x | 11 % | 0 % | 9 % |
| 1774112412 | 34 C | 0.8 x | 11 % | 0 % | 9 % |
| 1774111512 | 34 C | 0.2 x | 11 % | 0 % | 9 % |
| 1774110612 | 34 C | 0.4 x | 11 % | 0 % | 9 % |
| 1774109719 | 32 C | 0.6 x | 11 % | 0 % | 9 % |
| 1774108812 | 33 C | 0.7 x | 11 % | 0 % | 9 % |
| 1774107912 | 31 C | 0.3 x | 11 % | 0 % | 9 % |
| 1774107012 | 31 C | 0.3 x | 12 % | 0 % | 9 % |
| 1774106112 | 31 C | 0.6 x | 12 % | 0 % | 9 % |
| 1774105212 | 33 C | 0.5 x | 12 % | 0 % | 9 % |
| 1774104311 | 32 C | 0.4 x | 12 % | 0 % | 9 % |
| 1774103411 | 32 C | 0.6 x | 12 % | 0 % | 9 % |
| 1774102511 | 32 C | 0.6 x | 12 % | 0 % | 9 % |
| 1774101612 | 31 C | 0.4 x | 12 % | 0 % | 9 % |
| 1774100710 | 32 C | 0.8 x | 12 % | 0 % | 9 % |
| 1774099807 | 31 C | 0.6 x | 12 % | 0 % | 9 % |
| 1774098912 | 30 C | 0.7 x | 12 % | 0 % | 9 % |
| 1774098011 | 33 C | 0.2 x | 12 % | 0 % | 9 % |
| 1774097112 | 32 C | 1.1 x | 12 % | 0 % | 9 % |
| 1774096281 | 32 C | 0.4 x | 12 % | 0 % | 9 % |
| 1774095347 | 33 C | 0.5 x | 12 % | 0 % | 9 % |
| 1774094560 | 31 C | 0.5 x | 11 % | 0 % | 9 % |
*Used Equation Coefficients:
TEMP: 0, 1, 0
LOAD: 0, 0.1, 0
RAM: 0, 1, 0
SWAP: 0, 1, 0
DISK: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)