APRS Track Direct

My position About ☰

reset

KC0JMW-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC0JMW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*	InetiGate*
1786756073	161 Pkts	161 Pkts	74 Pkts	16 C	0 Pkts
1786752473	143 Pkts	143 Pkts	63 Pkts	16 C	0 Pkts
1786748873	146 Pkts	146 Pkts	75 Pkts	16 C	0 Pkts
1786745273	142 Pkts	142 Pkts	70 Pkts	15 C	0 Pkts
1786741673	123 Pkts	123 Pkts	43 Pkts	16 C	0 Pkts
1786738073	116 Pkts	116 Pkts	46 Pkts	16 C	0 Pkts
1786734473	122 Pkts	122 Pkts	36 Pkts	16 C	0 Pkts
1786730873	91 Pkts	91 Pkts	29 Pkts	16 C	0 Pkts
1786727273	77 Pkts	77 Pkts	14 Pkts	16 C	0 Pkts
1786723673	108 Pkts	108 Pkts	30 Pkts	16 C	2 Pkts
1786720073	104 Pkts	104 Pkts	27 Pkts	16 C	0 Pkts
1786716474	201 Pkts	201 Pkts	34 Pkts	16 C	0 Pkts
1786712874	120 Pkts	120 Pkts	48 Pkts	15 C	0 Pkts
1786709274	90 Pkts	90 Pkts	30 Pkts	16 C	0 Pkts
1786705673	86 Pkts	86 Pkts	26 Pkts	16 C	0 Pkts
1786702073	80 Pkts	80 Pkts	18 Pkts	16 C	0 Pkts
1786698473	99 Pkts	97 Pkts	27 Pkts	16 C	0 Pkts
1786694873	92 Pkts	91 Pkts	27 Pkts	16 C	0 Pkts
1786691273	98 Pkts	98 Pkts	38 Pkts	16 C	0 Pkts
1786687673	87 Pkts	86 Pkts	32 Pkts	16 C	0 Pkts
1786684076	89 Pkts	88 Pkts	28 Pkts	16 C	0 Pkts
1786680473	97 Pkts	95 Pkts	26 Pkts	16 C	0 Pkts
1786676873	87 Pkts	87 Pkts	27 Pkts	16 C	0 Pkts
1786673273	81 Pkts	81 Pkts	26 Pkts	16 C	0 Pkts

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)