APRS Track Direct

My position About ☰

reset

PY4CT-L Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PY4CT-L. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RX Avg 10m*	TX Avg 10m*	RX Count 10m*	TX Count 10m*
1779808249	0 erlang	0.09 erlang	0 receptions	5 transmissions
1779807649	0 erlang	0.04 erlang	0 receptions	6 transmissions
1779807049	0 erlang	0.05 erlang	0 receptions	6 transmissions
1779806449	0 erlang	0.11 erlang	0 receptions	14 transmissions
1779805849	0 erlang	0.11 erlang	0 receptions	10 transmissions
1779805249	0 erlang	0.41 erlang	0 receptions	14 transmissions
1779804656	0 erlang	0.33 erlang	0 receptions	20 transmissions
1779804049	0 erlang	0.11 erlang	0 receptions	16 transmissions
1779803449	0 erlang	0.17 erlang	0 receptions	14 transmissions
1779802849	0.02 erlang	0.58 erlang	1 receptions	42 transmissions
1779802249	0.11 erlang	0.74 erlang	3 receptions	25 transmissions
1779801649	0 erlang	0.37 erlang	0 receptions	34 transmissions
1779801049	0 erlang	0.79 erlang	0 receptions	17 transmissions
1779800449	0 erlang	0.15 erlang	0 receptions	15 transmissions
1779799849	0 erlang	0.25 erlang	0 receptions	13 transmissions
1779799249	0 erlang	0.31 erlang	0 receptions	23 transmissions
1779798649	0 erlang	0.04 erlang	1 receptions	4 transmissions
1779798049	0 erlang	0.01 erlang	0 receptions	2 transmissions
1779797449	0 erlang	0.04 erlang	2 receptions	3 transmissions
1779796849	0 erlang	0.04 erlang	0 receptions	5 transmissions
1779796249	0 erlang	0.01 erlang	0 receptions	2 transmissions
1779795649	0 erlang	0.05 erlang	1 receptions	5 transmissions
1779795049	0.4 erlang	0.32 erlang	14 receptions	26 transmissions
1779755011	0 erlang	0.91 erlang	0 receptions	20 transmissions
1779754411	0 erlang	0.84 erlang	0 receptions	24 transmissions

*Used Equation Coefficients:

RX Avg 10m: 0, 0.001, 0

TX Avg 10m: 0, 0.001, 0

RX Count 10m: 0, 1, 0

TX Count 10m: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)