APRS Track Direct

My position About ☰

reset

KQ4YPX-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KQ4YPX-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1773531693	310 Pkts	303 Pkts	147 Pkts	45 C
1773528197	306 Pkts	306 Pkts	139 Pkts	45 C
1773526397	287 Pkts	287 Pkts	140 Pkts	45 C
1773524598	290 Pkts	290 Pkts	136 Pkts	45 C
1773522797	304 Pkts	304 Pkts	138 Pkts	45 C
1773520997	270 Pkts	269 Pkts	124 Pkts	45 C
1773519197	293 Pkts	292 Pkts	129 Pkts	44 C
1773517398	309 Pkts	309 Pkts	137 Pkts	44 C
1773514900	349 Pkts	347 Pkts	142 Pkts	44 C
1773513100	319 Pkts	319 Pkts	138 Pkts	44 C
1773511300	299 Pkts	298 Pkts	138 Pkts	44 C
1773509500	324 Pkts	324 Pkts	155 Pkts	43 C
1773507700	300 Pkts	300 Pkts	130 Pkts	43 C
1773505900	290 Pkts	290 Pkts	142 Pkts	43 C
1773504101	373 Pkts	372 Pkts	117 Pkts	43 C
1773502300	274 Pkts	273 Pkts	127 Pkts	42 C
1773500500	319 Pkts	319 Pkts	143 Pkts	42 C
1773498700	285 Pkts	283 Pkts	120 Pkts	42 C
1773496900	307 Pkts	307 Pkts	127 Pkts	42 C
1773495100	308 Pkts	305 Pkts	139 Pkts	42 C
1773493300	319 Pkts	319 Pkts	102 Pkts	42 C
1773491500	294 Pkts	292 Pkts	111 Pkts	42 C
1773489700	319 Pkts	319 Pkts	124 Pkts	42 C
1773487900	277 Pkts	276 Pkts	105 Pkts	42 C
1773486099	264 Pkts	264 Pkts	111 Pkts	42 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)