This is the latest recevied telemetry packets stored in our database for station/object SV1EFM-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774116087 | 3.95 VDC | 0 VDC | 0 | 0 | 0 |
| 1774113373 | 3.98 VDC | 0 VDC | 0 | 0 | 0 |
| 1774110463 | 4.02 VDC | 0 VDC | 0 | 0 | 0 |
| 1774109560 | 4 VDC | 0 VDC | 0 | 0 | 0 |
| 1774108656 | 3.98 VDC | 0 VDC | 0 | 0 | 0 |
| 1774107752 | 3.97 VDC | 0 VDC | 0 | 0 | 0 |
| 1774106846 | 3.96 VDC | 0 VDC | 0 | 0 | 0 |
| 1774105039 | 3.92 VDC | 0 VDC | 0 | 0 | 0 |
| 1774104136 | 3.89 VDC | 0 VDC | 0 | 0 | 0 |
| 1774103231 | 3.84 VDC | 0 VDC | 0 | 0 | 0 |
| 1774102326 | 3.78 VDC | 0 VDC | 0 | 0 | 0 |
| 1774101422 | 3.73 VDC | 0 VDC | 0 | 0 | 0 |
| 1774100518 | 3.68 VDC | 0 VDC | 0 | 0 | 0 |
| 1774098932 | 3.6 VDC | 0 VDC | 0 | 0 | 0 |
| 1774098026 | 3.55 VDC | 0 VDC | 0 | 0 | 0 |
| 1774096219 | 3.34 VDC | 0 VDC | 0 | 0 | 0 |
| 1774095314 | 3.17 VDC | 0 VDC | 0 | 0 | 0 |
| 1774086070 | 2.9 VDC | 0 VDC | 0 | 0 | 0 |
| 1774085167 | 3.05 VDC | 0 VDC | 0 | 0 | 0 |
| 1774084261 | 3.17 VDC | 0 VDC | 0 | 0 | 0 |
| 1774084186 | 3.19 VDC | 0 VDC | 0 | 0 | 0 |
| 1774083553 | 3.24 VDC | 0 VDC | 0 | 0 | 0 |
| 1774082649 | 3.32 VDC | 0 VDC | 0 | 0 | 0 |
| 1774081744 | 3.36 VDC | 0 VDC | 0 | 0 | 0 |
| 1774080840 | 3.39 VDC | 0 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)