This is the latest recevied telemetry packets stored in our database for station/object SP7MP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786737441 | 64 Count | 688 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786735640 | 63 Count | 686 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786733839 | 62 Count | 686 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786732038 | 61 Count | 684 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786730238 | 60 Count | 684 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1786728453 | 59 Count | 683 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786726652 | 58 Count | 682 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1786724852 | 57 Count | 682 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786723051 | 56 Count | 680 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786721250 | 55 Count | 680 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1786719449 | 54 Count | 679 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786717648 | 53 Count | 679 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786715848 | 52 Count | 678 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786714047 | 51 Count | 677 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786712246 | 50 Count | 676 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786710445 | 49 Count | 675 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786708645 | 48 Count | 675 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786706844 | 47 Count | 673 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786705043 | 46 Count | 673 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786703242 | 45 Count | 671 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1786701442 | 44 Count | 671 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786699641 | 43 Count | 671 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786697840 | 42 Count | 670 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786696039 | 41 Count | 670 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786694239 | 40 Count | 668 Count | 0 Count | 3.98 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)