APRS Track Direct

My position About ☰

reset

YO2LIQ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO2LIQ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1782515631	13.27 Volt	330 Pkt	40 Pkt	91 Pcnt
1782515031	13.35 Volt	330 Pkt	50 Pkt	90 Pcnt
1782514431	13.35 Volt	330 Pkt	50 Pkt	89 Pcnt
1782513831	13.27 Volt	320 Pkt	40 Pkt	88 Pcnt
1782513231	13.35 Volt	330 Pkt	50 Pkt	89 Pcnt
1782512631	13.19 Volt	320 Pkt	50 Pkt	89 Pcnt
1782512031	13.19 Volt	310 Pkt	40 Pkt	88 Pcnt
1782511431	13.27 Volt	320 Pkt	50 Pkt	88 Pcnt
1782510831	13.35 Volt	320 Pkt	50 Pkt	85 Pcnt
1782510231	13.19 Volt	310 Pkt	50 Pkt	85 Pcnt
1782509631	13.27 Volt	300 Pkt	40 Pkt	84 Pcnt
1782509031	13.35 Volt	310 Pkt	50 Pkt	84 Pcnt
1782508431	13.27 Volt	310 Pkt	40 Pkt	84 Pcnt
1782507831	13.35 Volt	300 Pkt	40 Pkt	84 Pcnt
1782507231	13.35 Volt	300 Pkt	40 Pkt	84 Pcnt
1782506631	13.35 Volt	290 Pkt	40 Pkt	83 Pcnt
1782506031	13.19 Volt	280 Pkt	40 Pkt	81 Pcnt
1782505431	13.35 Volt	270 Pkt	40 Pkt	79 Pcnt
1782504831	13.19 Volt	270 Pkt	40 Pkt	81 Pcnt
1782504231	13.19 Volt	270 Pkt	40 Pkt	83 Pcnt
1782503631	13.35 Volt	280 Pkt	50 Pkt	86 Pcnt
1782503031	13.35 Volt	280 Pkt	50 Pkt	88 Pcnt
1782502431	13.35 Volt	290 Pkt	50 Pkt	90 Pcnt
1782501831	13.35 Volt	280 Pkt	50 Pkt	94 Pcnt
1782501231	13.19 Volt	270 Pkt	50 Pkt	93 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)