APRS Track Direct

My position About ☰

reset

AE4BA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AE4BA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1774108836	0.31 Load	27.8 DegC	883 Mb	1318 Pkt	429 Pkt
1774108536	0.07 Load	27.8 DegC	882 Mb	1193 Pkt	424 Pkt
1774108235	0.07 Load	27.8 DegC	896 Mb	1200 Pkt	438 Pkt
1774107937	0.07 Load	27.8 DegC	880 Mb	1276 Pkt	503 Pkt
1774107635	0.08 Load	27.8 DegC	892 Mb	1236 Pkt	497 Pkt
1774107336	0.1 Load	27.8 DegC	869 Mb	1215 Pkt	597 Pkt
1774107036	0.09 Load	27.8 DegC	872 Mb	1139 Pkt	433 Pkt
1774106736	0.07 Load	27.8 DegC	880 Mb	1413 Pkt	489 Pkt
1774106436	0.07 Load	27.8 DegC	895 Mb	1124 Pkt	416 Pkt
1774106135	0.06 Load	27.8 DegC	880 Mb	1247 Pkt	497 Pkt
1774105836	0.06 Load	27.8 DegC	866 Mb	1143 Pkt	428 Pkt
1774105535	0.09 Load	27.8 DegC	891 Mb	1197 Pkt	444 Pkt
1774105236	0.07 Load	27.8 DegC	886 Mb	1154 Pkt	488 Pkt
1774104935	0.1 Load	27.8 DegC	879 Mb	1147 Pkt	439 Pkt
1774104636	0.11 Load	27.8 DegC	889 Mb	1161 Pkt	415 Pkt
1774104336	0.19 Load	27.8 DegC	877 Mb	1663 Pkt	605 Pkt
1774104035	0.27 Load	27.8 DegC	874 Mb	1180 Pkt	553 Pkt
1774103736	0.35 Load	27.8 DegC	884 Mb	1207 Pkt	483 Pkt
1774103435	0.08 Load	27.8 DegC	882 Mb	1294 Pkt	416 Pkt
1774103136	0.07 Load	27.8 DegC	890 Mb	1376 Pkt	533 Pkt
1774102835	0.09 Load	27.8 DegC	865 Mb	1290 Pkt	468 Pkt
1774102536	0.17 Load	27.8 DegC	857 Mb	2359 Pkt	1139 Pkt
1774102236	0.09 Load	27.8 DegC	881 Mb	1141 Pkt	530 Pkt
1774101935	0.07 Load	27.8 DegC	891 Mb	2397 Pkt	623 Pkt
1774101636	0.12 Load	27.8 DegC	892 Mb	1239 Pkt	572 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)