APRS Track Direct

My position About ☰

reset

BV5AB-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BV5AB-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	PM2.5*	PM10*	CO*	O3*
1732459083	17 ug/m3	33 ug/m3	0.48 ppm	5 ppb
1732458484	17 ug/m3	33 ug/m3	0.48 ppm	5 ppb
1732457884	17 ug/m3	33 ug/m3	0.48 ppm	5 ppb
1732457283	17 ug/m3	33 ug/m3	0.48 ppm	5 ppb
1732456683	19 ug/m3	30 ug/m3	0.5 ppm	11 ppb
1732456083	19 ug/m3	30 ug/m3	0.5 ppm	11 ppb
1732455483	19 ug/m3	30 ug/m3	0.5 ppm	11 ppb
1732454885	19 ug/m3	30 ug/m3	0.5 ppm	11 ppb
1732454285	19 ug/m3	30 ug/m3	0.5 ppm	11 ppb
1732453685	15 ug/m3	32 ug/m3	0.38 ppm	21 ppb
1732453083	15 ug/m3	32 ug/m3	0.38 ppm	21 ppb
1732452483	15 ug/m3	32 ug/m3	0.38 ppm	21 ppb
1732451884	15 ug/m3	32 ug/m3	0.38 ppm	21 ppb
1732451284	15 ug/m3	32 ug/m3	0.38 ppm	21 ppb
1732450684	15 ug/m3	32 ug/m3	0.38 ppm	21 ppb
1732450083	15 ug/m3	32 ug/m3	0.38 ppm	21 ppb
1732449483	12 ug/m3	33 ug/m3	0.4 ppm	26 ppb
1732448885	12 ug/m3	33 ug/m3	0.4 ppm	26 ppb
1732448283	12 ug/m3	33 ug/m3	0.4 ppm	26 ppb
1732447685	12 ug/m3	33 ug/m3	0.4 ppm	26 ppb
1732447086	12 ug/m3	33 ug/m3	0.4 ppm	26 ppb
1732446483	12 ug/m3	38 ug/m3	0.33 ppm	36 ppb
1732445883	12 ug/m3	38 ug/m3	0.33 ppm	36 ppb
1732445283	12 ug/m3	38 ug/m3	0.33 ppm	36 ppb
1732444683	12 ug/m3	38 ug/m3	0.33 ppm	36 ppb

*Used Equation Coefficients:

PM2.5: 0, 1, 0

PM10: 0, 1, 0

UV: 0, 1, 0

CO: 0, 0.01, 0

O3: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)