This is the latest recevied telemetry packets stored in our database for station/object PY5LF-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794916808 | 135 | 187 | 185 | 141 | 141 |
| 1794916508 | 130 | 160 | 159 | 129 | 128 |
| 1794916207 | 131 | 160 | 159 | 129 | 128 |
| 1794915907 | 131 | 160 | 159 | 128 | 127 |
| 1794915606 | 133 | 162 | 162 | 131 | 130 |
| 1794915306 | 134 | 173 | 172 | 140 | 140 |
| 1794915005 | 133 | 174 | 173 | 139 | 139 |
| 1794914704 | 127 | 180 | 178 | 137 | 137 |
| 1794914404 | 133 | 175 | 174 | 139 | 139 |
| 1794914102 | 134 | 163 | 163 | 132 | 131 |
| 1794913800 | 130 | 158 | 158 | 127 | 126 |
| 1794913499 | 131 | 160 | 159 | 128 | 128 |
| 1794913199 | 127 | 155 | 155 | 124 | 123 |
| 1794912898 | 128 | 156 | 156 | 125 | 124 |
| 1794912597 | 128 | 156 | 156 | 125 | 124 |
| 1794912297 | 126 | 154 | 154 | 123 | 122 |
| 1794911996 | 126 | 154 | 153 | 122 | 121 |
| 1794911696 | 125 | 152 | 151 | 120 | 119 |
| 1794911395 | 126 | 154 | 153 | 122 | 122 |
| 1794911094 | 126 | 153 | 153 | 122 | 121 |
| 1794910793 | 126 | 154 | 153 | 123 | 122 |
| 1794910492 | 125 | 152 | 151 | 121 | 120 |
| 1794910192 | 125 | 153 | 152 | 121 | 120 |
| 1794909891 | 125 | 152 | 152 | 121 | 120 |
| 1794909590 | 125 | 153 | 152 | 121 | 120 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)