This is the latest recevied telemetry packets stored in our database for station/object NA7Q-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792252478 | 13.42 | 15.18 | 0.33 | 4 | 65 |
| 1792251877 | 13.42 | 15.14 | 0.13 | 2 | 65 |
| 1792251276 | 13.42 | 15.09 | 0 | 0 | 65 |
| 1792250677 | 13.42 | 15 | 0 | 0 | 65 |
| 1792250077 | 13.39 | 14.9 | 0 | 0 | 65 |
| 1792249477 | 13.39 | 14.9 | 0 | 0 | 65 |
| 1792248877 | 13.27 | 13.64 | 0 | 0 | 65 |
| 1792248277 | 13.42 | 13.45 | 0 | 0 | 65 |
| 1792247677 | 13.4 | 9.37 | 0 | 0 | 65 |
| 1792247077 | 13.4 | 3.89 | 0 | 0 | 65 |
| 1792246477 | 13.4 | 3.28 | 0 | 0 | 65 |
| 1792245877 | 13.4 | 0 | 0 | 0 | 65 |
| 1792245300 | 13.4 | 0 | 0 | 0 | 65 |
| 1792244677 | 13.4 | 0 | 0 | 0 | 66 |
| 1792243477 | 13.4 | 0 | 0 | 0 | 66 |
| 1792242882 | 13.4 | 0 | 0 | 0 | 66 |
| 1792242297 | 13.4 | 0 | 0 | 0 | 66 |
| 1792241677 | 13.4 | 0 | 0 | 0 | 66 |
| 1792241104 | 13.37 | 0 | 0 | 0 | 66 |
| 1792240477 | 13.4 | 0 | 0 | 0 | 66 |
| 1792239881 | 13.4 | 0 | 0 | 0 | 67 |
| 1792239277 | 13.4 | 0 | 0 | 0 | 67 |
| 1792238677 | 13.4 | 0 | 0 | 0 | 67 |
| 1792238082 | 13.4 | 0 | 0 | 0 | 67 |
| 1792237477 | 13.4 | 0 | 0 | 0 | 67 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)