This is the latest recevied telemetry packets stored in our database for station/object K1JFJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774670292 | 4.2 VDC | 4.08 VDC | 0 | 0 | 0 |
| 1774668492 | 4.2 VDC | 4.06 VDC | 0 | 0 | 0 |
| 1774666692 | 4.2 VDC | 3.54 VDC | 0 | 0 | 0 |
| 1774664891 | 4.2 VDC | 3.44 VDC | 0 | 0 | 0 |
| 1774663091 | 4.2 VDC | 4.1 VDC | 0 | 0 | 0 |
| 1774661291 | 4.2 VDC | 4.54 VDC | 0 | 0 | 0 |
| 1774659491 | 4.2 VDC | 3.44 VDC | 0 | 0 | 0 |
| 1774657690 | 4.2 VDC | 4.48 VDC | 0 | 0 | 0 |
| 1774655890 | 4.19 VDC | 3.42 VDC | 0 | 0 | 0 |
| 1774654090 | 4.2 VDC | 4.52 VDC | 0 | 0 | 0 |
| 1774652290 | 4.2 VDC | 4.56 VDC | 0 | 0 | 0 |
| 1774650489 | 4.2 VDC | 4.52 VDC | 0 | 0 | 0 |
| 1774648689 | 4.2 VDC | 4.52 VDC | 0 | 0 | 0 |
| 1774646889 | 4.2 VDC | 4.52 VDC | 0 | 0 | 0 |
| 1774645089 | 4.2 VDC | 4.46 VDC | 0 | 0 | 0 |
| 1774643288 | 4.2 VDC | 4.52 VDC | 0 | 0 | 0 |
| 1774641488 | 4.2 VDC | 4.48 VDC | 0 | 0 | 0 |
| 1774639688 | 4.2 VDC | 4.46 VDC | 0 | 0 | 0 |
| 1774637888 | 4.2 VDC | 4.46 VDC | 0 | 0 | 0 |
| 1774636088 | 4.2 VDC | 4.46 VDC | 0 | 0 | 0 |
| 1774634287 | 4.2 VDC | 3.64 VDC | 0 | 0 | 0 |
| 1774632487 | 4.2 VDC | 4.26 VDC | 0 | 0 | 0 |
| 1774630687 | 4.2 VDC | 3.36 VDC | 0 | 0 | 0 |
| 1774628887 | 4.2 VDC | 4.38 VDC | 0 | 0 | 0 |
| 1774627086 | 4.2 VDC | 4.46 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)