This is the latest recevied telemetry packets stored in our database for station/object YB1LZ-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1778057944 | 25 °C | 48 %RH | 793 hPa | 0 | 0 |
| 1778056045 | 25 °C | 49 %RH | 793 hPa | 0 | 0 |
| 1778054144 | 24 °C | 49 %RH | 793 hPa | 0 | 0 |
| 1778052244 | 24 °C | 50 %RH | 793 hPa | 0 | 0 |
| 1778050344 | 24 °C | 50 %RH | 793 hPa | 0 | 0 |
| 1778048444 | 24 °C | 50 %RH | 794 hPa | 0 | 0 |
| 1778046544 | 23 °C | 51 %RH | 794 hPa | 0 | 0 |
| 1778044644 | 23 °C | 51 %RH | 794 hPa | 0 | 0 |
| 1778042744 | 23 °C | 51 %RH | 794 hPa | 0 | 0 |
| 1778040844 | 23 °C | 51 %RH | 795 hPa | 0 | 0 |
| 1778038944 | 23 °C | 51 %RH | 795 hPa | 0 | 0 |
| 1778037044 | 23 °C | 52 %RH | 795 hPa | 0 | 0 |
| 1778035144 | 23 °C | 52 %RH | 795 hPa | 0 | 0 |
| 1778033244 | 23 °C | 52 %RH | 795 hPa | 0 | 0 |
| 1778031344 | 22 °C | 51 %RH | 795 hPa | 0 | 0 |
| 1778029444 | 22 °C | 51 %RH | 795 hPa | 0 | 0 |
| 1778027544 | 22 °C | 51 %RH | 795 hPa | 0 | 0 |
| 1778025644 | 22 °C | 51 %RH | 795 hPa | 0 | 0 |
| 1778023745 | 22 °C | 51 %RH | 794 hPa | 0 | 0 |
| 1778021844 | 22 °C | 50 %RH | 794 hPa | 0 | 0 |
| 1778019945 | 23 °C | 50 %RH | 794 hPa | 0 | 0 |
| 1778019030 | 22 °C | 50 %RH | 794 hPa | 0 | 0 |
| 1778017130 | 22 °C | 50 %RH | 794 hPa | 0 | 0 |
| 1778015230 | 23 °C | 50 %RH | 794 hPa | 0 | 0 |
| 1778013330 | 23 °C | 50 %RH | 794 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)