This is the latest recevied telemetry packets stored in our database for station/object DL1MPL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1790610426 | 1002 hPa | 27.8 C deg | 0 % | 1025.1 hPa | 23.7 C deg |
| 1790606797 | 1002.1 hPa | 28 C deg | 0 % | 1025.2 hPa | 23.3 C deg |
| 1790604983 | 1002.1 hPa | 28 C deg | 0 % | 1025.2 hPa | 23.1 C deg |
| 1790603166 | 1002.2 hPa | 28 C deg | 0 % | 1025.3 hPa | 22.8 C deg |
| 1790601351 | 1002.3 hPa | 28.1 C deg | 0 % | 1025.4 hPa | 22.6 C deg |
| 1790599536 | 1002.6 hPa | 28.2 C deg | 0 % | 1025.7 hPa | 22.2 C deg |
| 1790597722 | 1002.8 hPa | 28.2 C deg | 0 % | 1025.9 hPa | 21.8 C deg |
| 1790595907 | 1003 hPa | 27.8 C deg | 0 % | 1026.1 hPa | 21.2 C deg |
| 1790594090 | 1003.1 hPa | 27 C deg | 0 % | 1026.2 hPa | 20.4 C deg |
| 1790592275 | 1003.2 hPa | 25.9 C deg | 0 % | 1026.5 hPa | 19.6 C deg |
| 1790586830 | 1003.4 hPa | 20.1 C deg | 0 % | 1027.2 hPa | 16.6 C deg |
| 1790585015 | 1003.4 hPa | 18.6 C deg | 0 % | 1027.3 hPa | 15.9 C deg |
| 1790583200 | 1003.4 hPa | 17 C deg | 0 % | 1027.4 hPa | 15.4 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)