This is the latest recevied telemetry packets stored in our database for station/object SA3MHZ-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779896431 | 24.1 | 36.85 | 1026.25 | 0 | 0 |
| 1779896408 | 24.1 | 36.85 | 1026.25 | 0 | 0 |
| 1779895124 | 23.9 | 36.29 | 1025.5 | 0 | 0 |
| 1779893320 | 23.3 | 35.84 | 1027.13 | 0 | 0 |
| 1779891505 | 23.5 | 35.59 | 1027.25 | 0 | 0 |
| 1779891495 | 23.5 | 35.59 | 1027 | 0 | 0 |
| 1779891479 | 23.5 | 35.59 | 1026.38 | 0 | 0 |
| 1779891461 | 23.2 | 34.13 | 1026.13 | 0 | 0 |
| 1779891441 | 23.2 | 34.13 | 1026 | 0 | 0 |
| 1779890248 | 21.9 | 32.83 | 1006 | 0 | 0 |
| 1779889917 | 26.9 | 29.21 | 1026.38 | 0 | 0 |
| 1779889716 | 26.7 | 29.63 | 1027.13 | 0 | 0 |
| 1779889668 | 26.6 | 30.02 | 1024.88 | 0 | 0 |
| 1779889599 | 26.4 | 30.23 | 1025.5 | 0 | 0 |
| 1779889580 | 26.5 | 30.06 | 1026.13 | 0 | 0 |
| 1779889556 | 26.4 | 30.23 | 1025.5 | 0 | 0 |
| 1779889532 | 26.4 | 30.23 | 1026.38 | 0 | 0 |
| 1779889508 | 26.4 | 30.23 | 1026.88 | 0 | 0 |
| 1779889484 | 26.3 | 30.55 | 1026.38 | 0 | 0 |
| 1779889396 | 26.2 | 30.49 | 1027.38 | 0 | 0 |
| 1779889372 | 26.1 | 30.66 | 1029.25 | 0 | 0 |
| 1779889348 | 26.1 | 30.66 | 1028.75 | 0 | 0 |
| 1779889323 | 26.1 | 30.66 | 1026.75 | 0 | 0 |
| 1779889300 | 25.9 | 30.85 | 1029.25 | 0 | 0 |
| 1779889277 | 25.9 | 30.85 | 1027.25 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)